User's Manual

1-2-7. RF RECEIVING ON/OFF
•The picture of car on the LCD will disappear when the
receiver is set
to OFF.
•The receiver cannot receive a call when the receiver is
turned OFF or
the ID CODE does not match.
1-2-8. HOW TO LEARN ID
•The receiver enters into the ID LEARLING mode when you
press two buttons for more then 2 seconds simultaneously
and then, it blinks.
“Id”on the LCD. The receiver learns the ID and memorizes
it if the
receiver receives the transmitted signal from tramsmitter
within 30
seconds. The transmitted signal from transmitter can be
generated when
DOOR LOCK, DOOR UNLOCK, TRUNK OPEN, SHOCK SENSOR, DOOR
OPEN is sensed.
When the receiver succeened in ID learning, the receiver
sends triple
Short beep.
1-2-9. THE OPERATION WHEN INSTALLED
1-2-9-1. STANT-ALONE OPERATION
•The transmitter enters into ARM MODE after 30 seconds
when the key is
removed from the key box and the transmitter enters into
DISARM MODE
just after that the car is started by key.
MODE PARAMETER
OPEERATION
OF
TRANSMITTER
LCD DISPLAY
OF RECEIVER
ALERT
TONE/
VIBRATION
DOOR LOCK Instant RF
TX
‘LOCK’ICON SINGLE
BEEP
DOOR UNLOCK Instant RF
TX
‘UNLOCK’ICO
N
DUAL BEEP
TRUNK OPEN
Instant RF
TX
& SIREN
TRUNK OPEN
ALERT TONE
(15 TIMES)
SHOCK
SENSOR
Instant RF
TX
& SIREN
BLINKING OF
CAR SHAPE
ALERT TONE
(15 TIMES)
ARM
MODE
DOOR OPEN
30 second
wait
SIREN/STARTK
ILL
/RF TX
DOOR OPEN
ALERT TONE
(15 TIMES)