Specifications

14
STORAGE
1) Flush pump with clean water. Allow pump to run dry to exhaust water out of pump. DO
NOT RUN PUMP DRY FOR MORE THAN 20 SECONDS AS THIS WILL CAUSE DAMAGE TO PACKINGS.
Do not store pump with chemical or any liquid remaining in pump as this can cause corrosion
and damage if allowed to freeze.
2) Drain fuel from fuel tank and dispose of waste fuel in a proper manner.
3) With control valve set at start,run engine at idle to exhaust fuel from fuel lines and carburetor.
4) Leave throttle set at low speed.
5) Leave control valve set at start position.
6) Store engine and pump in dry and clean area in moderate temperature condition away
from humidity.
RECOMMENDATION – Make repairs before storing. Always use genuine DRAMM parts to assure
the highest quality.