User`s guide

6-16
Journal Limit, continued
Sample journal
parameter setup
NOTE
Repeat the same procedure to set entries for other journal parameters.
Action... Result...
STEP 1: From the Advanced
Options screen, press Journal
Limit. The Journal Categories
screen will be displayed.
Press a category to display journal
parameters and the limit setup
menu. For example, press
Standard List to display the
parameters under it. Proceed to
Step 2.
MARK112_301
STEP 2: Press to select the
journal parameter you want to set
up.
• Press to select the applicable
phase (A, B, C, D) or phase-to-
phase setting (A-B, B-C, C-A)
where you want to set threshold
limits.
• If you want to set threshold
limits to capture data, press to
check Enable. The limit fields
will be activated to allow you
to enter threshold values.
Press the limit field (Very
High, High, Low, Very Low,
Dead Band) to display the
numeric keypad. Use the
keypad to enter the limits for
the corresponding phase.
• Press Exit to accept the new
threshold limits for the journal
entry.
• If you want to record periodical
statistical data by time interval,
select Journal Interval under
Advanced Options screen.
Refer to pages 6-18 to 6-19.
MARK112_302
MARK112_302b