User`s guide

5-3
CH 5/ Start Menu
Section A
Automatic Setup
Overview
Automatic Setup
procedure
Automatic Setup is a one-stop process using pre-defined settings to set the unit
automatically. Users have the option to view the list of parameter settings, change
probe types if current will be monitored, and/or proceed directly with data monitoring.
Follow these steps to perform Automatic Setup.
Continued on next page
Action... Result...
STEP 1: From the Start Menu,
press Automatic Setup. The auto-
configured circuit type, nominal
voltage, current and frequency
values appear on screen. Data
card status and available space in
card are also displayed.
To continue Automatic Setup
and begin data monitoring,
press OK. Proceed to Step 2.
To view the list of parameter
settings for Automatic Setup,
press Summary. Proceed to
Step 3 on page 5-4.
To display/change probe types
for current monitoring, press
Probe. Proceed to Step 4 on
page 5-4.
Press Cancel to quit and return
to Start Menu.
MARK101a
STEP 2: The Monitoring Menu
screen allows users to begin
monitoring immediately or at a
specified time and date.
To start monitoring, press Start
Now!
Proceed to Section C Monitor
Same Circuit - Turning
Monitoring On/Off on page 5-24.
MARK123b