Dranetz-BMI PowerVisa® 440, PowerGuide® 4400 and PowerXplorer® PX5 Operational Skills Course: TS-DB-PX5 (PQS104) Date & Location: 12/11/08 Santa Clara, CA Presented by: PowerCET® Corporation 3350 Scott Blvd., Bldg. 55 Unit 1 Santa Clara, CA 95054 USA 408/988-1346 | FAX 408/988-4869 E-mail: training@powercet.com Web Page: http://www.powercet.com © 2006-2009 by PowerCET Corporation. All rights reserved.
DB-PX5 - PowerVisa 440® / PowerGuide® 4400 / PowerXplorer® PX5 Op. Skills Dranetz-BMI PowerVisa 440, PowerGuide® 4400 & PowerXplorer® PX5 Operational Skills Presented by: PowerCET® Corporation 3350 Scott Blvd., Bldg. 55, Unit 1, Santa Clara, CA 95054 USA 408/988-1346 | FAX 408/988-4869 E-mail: training@powercet.com Web Page: http://www.powercet.com ©2006-08 by PowerCET Corporation. All rights reserved. ©2006-2008 PowerCET Corporation. All rights reserved.
DB-PX5 - PowerVisa 440® / PowerGuide® 4400 / PowerXplorer® PX5 Op. Skills ©2006-2008 PowerCET Corporation. All rights reserved.
DB-PX5 - PowerVisa 440® / PowerGuide® 4400 / PowerXplorer® PX5 Op. Skills ©2006-2008 PowerCET Corporation. All rights reserved. Features and Controls •360 x 240 (1/4 VGA) pixel backlit color LCD Touch Screen, 3.75” x 4.75” •8” x 12” x 2.5” •Weight: 4.2LBS 5 ©2006-2008 PowerCET Corporation. All rights reserved.
DB-PX5 - PowerVisa 440® / PowerGuide® 4400 / PowerXplorer® PX5 Op. Skills ©2006-2008 PowerCET Corporation. All rights reserved. Program Cards ® •Firmware upgrades are downloaded from Web, put onto a CF card with a PC, and loaded from CF Card in the top slot (#1) (Insert/remove only with power off) •Card with firmware should be removed from slot 1 after upgrading. 7 ©2006-2008 PowerCET Corporation. All rights reserved.
DB-PX5 - PowerVisa 440® / PowerGuide® 4400 / PowerXplorer® PX5 Op. Skills ©2006-2008 PowerCET Corporation. All rights reserved. External Memory ****Firmware Version 3 (and above)**** •Compact Flash Memory Cards • Only Dranetz-BMI 32M – 32GB Cards guaranteed to work • 32M minimum required…4GB recommended.
DB-PX5 - PowerVisa 440® / PowerGuide® 4400 / PowerXplorer® PX5 Op. Skills ©2006-2008 PowerCET Corporation. All rights reserved. Outside Connections •AC/Battery Operation •90-265VAC, 50-60Hz External Pwr. Supply •2-3 hours operation on (new) battery •4-hour charging time •Optical Data Port •External Communication Adapters: •Fiber optic - RS232, ext modem (v1.5) •Fiber optic - USB •Fiber optic - IP-addressable Ethernet 11 ©2006-2008 PowerCET Corporation. All rights reserved.
DB-PX5 - PowerVisa 440® / PowerGuide® 4400 / PowerXplorer® PX5 Op. Skills ©2006-2008 PowerCET Corporation. All rights reserved. Frequency Ranges •Model PowerGuide 4400 •2 user selectable ranges: • 30 - 70 Hz default, with up to 25% Vthd • 5 - 30 Hz •Model PowerVisa 440 • No answer modules • No preprogrammed Inrush & Fault Recorder modes. • Post cycle capture limited to 100 cycles.
DB-PX5 - PowerVisa 440® / PowerGuide® 4400 / PowerXplorer® PX5 Op. Skills ©2006-2008 PowerCET Corporation. All rights reserved. Calculated Parameters •True Average Power •Apparent Power •Fundamental Apparent Power •Fundamental Power •Volt Ampere Reactive •True Power Factor •Displacement Power Factor For Details, see Appendix B Users Manual 15 ©2006-2008 PowerCET Corporation. All rights reserved.
DB-PX5 - PowerVisa 440® / PowerGuide® 4400 / PowerXplorer® PX5 Op. Skills ©2006-2008 PowerCET Corporation. All rights reserved. Optional Accessories •Compact Flash Memory Cards: 32 / 64 / 128 / 256M •Current Probes •External Communication Adapters •Portable Field Printer •Secure Monitoring Enclosure •Carrying, Shipping Cases •Electrical Energy Mgmt. Field Handbook •PQ Analysis Field Handbook •Phase Power Adapter 17 ©2006-2008 PowerCET Corporation. All rights reserved.
DB-PX5 - PowerVisa 440® / PowerGuide® 4400 / PowerXplorer® PX5 Op. Skills ©2006-2008 PowerCET Corporation. All rights reserved. Current Probes - 1 AC Current Clamps •(440/4400/PX5/PP4300 compatible connector: Hypertronics Model D01PB406MST connector 4 pin male.) •TR-2501 100MA to 1.
DB-PX5 - PowerVisa 440® / PowerGuide® 4400 / PowerXplorer® PX5 Op. Skills ©2006-2008 PowerCET Corporation. All rights reserved. Current Probes - 3 • Flexible Probes and Accessories – 3-Range 30/300/3000A • ACP3003_3/24 (3v output) • ACP3000_3/24 (3v output) • ACP3000_1/24 (1.5v output) – 3-Range 60/600/6000A • ACP6003_3/24 (3v output) • ACP6000_3/24 (3v output) • ACP6000_1/24 (1.
DB-PX5 - PowerVisa 440® / PowerGuide® 4400 / PowerXplorer® PX5 Op. Skills ©2006-2008 PowerCET Corporation. All rights reserved. Current Probe Adapters • Current Probe Adapter – A-ACP-FBNC-PX5 (a male BNC adapter is also available under the part number A-ACPMBNC-PX5 or 23 ©2006-2008 PowerCET Corporation. All rights reserved.
DB-PX5 - PowerVisa 440® / PowerGuide® 4400 / PowerXplorer® PX5 Op. Skills ©2006-2008 PowerCET Corporation. All rights reserved. Current Probes - 4 25 ©2006-2008 PowerCET Corporation. All rights reserved. Current Probes - 5 26 © 2006-2010 by PowerCET Corporation. All rights reserved.
DB-PX5 - PowerVisa 440® / PowerGuide® 4400 / PowerXplorer® PX5 Op. Skills ©2006-2008 PowerCET Corporation. All rights reserved. Optional Accessories: Software •Node-Link™ •Transfers data via optical port to a PC •DranView™ •View & Analyze Event Data •Professional •Enterprise 27 ©2006-2008 PowerCET Corporation. All rights reserved.
DB-PX5 - PowerVisa 440® / PowerGuide® 4400 / PowerXplorer® PX5 Op. Skills ©2006-2008 PowerCET Corporation. All rights reserved. Basic Operation: Home Screen •Status Display •Model, Firmware Version, Current Date and Time •Monitoring Status (On, Off, Done, Armed) •Circuit Type •Memory Card Status •Data Filename •# Events Saved •# Journal Logs 29 ©2006-2008 PowerCET Corporation. All rights reserved.
DB-PX5 - PowerVisa 440® / PowerGuide® 4400 / PowerXplorer® PX5 Op. Skills ©2006-2008 PowerCET Corporation. All rights reserved. Basic Operation: Home Screen •Preferences •Time & Date •Languages •LCD Display •Beeper •Communications •Memory Card •Start/Setup Button •Setup and Start/Stop Monitoring 31 ©2006-2008 PowerCET Corporation. All rights reserved.
DB-PX5 - PowerVisa 440® / PowerGuide® 4400 / PowerXplorer® PX5 Op. Skills ©2006-2008 PowerCET Corporation. All rights reserved. Basic Operation: Setup-Set Time & Date yFrom the Home Screen, Press: Preferences Icon ySet Correct Time and Date yOptional: Choose Clock Style (Analog, Digital 12 Hr. or Digital 24 Hr.) yOptional: Choose Date Style (mm/dd/yy, dd/mm/yy, yy/mm/dd) 33 ©2006-2008 PowerCET Corporation. All rights reserved.
DB-PX5 - PowerVisa 440® / PowerGuide® 4400 / PowerXplorer® PX5 Op. Skills ©2006-2008 PowerCET Corporation. All rights reserved. Basic Operation: Setup - Beeper yPress: Turn Beeper On/Off yBeeps when thresholds crossed (touch-click feedback unaffected) 35 ©2006-2008 PowerCET Corporation. All rights reserved. Basic Operation: Set File Size yFrom the Home Screen, Press: Preferences yPress: Memory Card Recommend using the 128 MB default unless your PC has 4 GB of internal memory.
DB-PX5 - PowerVisa 440® / PowerGuide® 4400 / PowerXplorer® PX5 Op. Skills ©2006-2008 PowerCET Corporation. All rights reserved. Workbook Modules: 1 Hardware and Basic Operation 2 Real-Time Monitoring 3 Long-Term Monitoring 4 Viewing Event Data on the 4400 / PX5 5 Viewing Event Data in DranView 37 ©2006-2008 PowerCET Corporation. All rights reserved.
DB-PX5 - PowerVisa 440® / PowerGuide® 4400 / PowerXplorer® PX5 Op. Skills ©2006-2008 PowerCET Corporation. All rights reserved. Hookup Connect unit to 120V single-phase circuit. 39 ©2006-2008 PowerCET Corporation. All rights reserved. Hookup Three phase circuit connection with stackable jumpers. 40 © 2006-2010 by PowerCET Corporation. All rights reserved.
DB-PX5 - PowerVisa 440® / PowerGuide® 4400 / PowerXplorer® PX5 Op. Skills ©2006-2008 PowerCET Corporation. All rights reserved. Verify/Change Setup as Needed • On power up, 4400 & PX5 use the last used setup (note circuit type on status display for a reminder) • Verify correct setup before using real-time monitoring screens for accurate measurements. Options: 1. 2. 3. 4.
DB-PX5 - PowerVisa 440® / PowerGuide® 4400 / PowerXplorer® PX5 Op. Skills ©2006-2008 PowerCET Corporation. All rights reserved. Setup Summary •Scroll down by dragging the scroll bar •Check the current probes and scale factors •Press: Exit •Press: Probe to correct current probe selection and scale factors if necessary 43 ©2006-2008 PowerCET Corporation. All rights reserved.
DB-PX5 - PowerVisa 440® / PowerGuide® 4400 / PowerXplorer® PX5 Op. Skills ©2006-2008 PowerCET Corporation. All rights reserved. Scope Mode: Screen Layout From the Home screen, press: Scope 45 ©2006-2008 PowerCET Corporation. All rights reserved. Scope Mode: Turning channels On/Off •From the Scope screen, press: Chan Toggles all volts, amps on/off •Toggle individual channels, and/or rows and columns of channels on/off •Turn off unused channels •Press OK 46 © 2006-2010 by PowerCET Corporation.
DB-PX5 - PowerVisa 440® / PowerGuide® 4400 / PowerXplorer® PX5 Op. Skills ©2006-2008 PowerCET Corporation. All rights reserved. Scope Mode: Check Range •From the Scope screen, press: CkRng •Input range display shows the % of the instruments full range detected on each channel •OK = Within Range •OVER = Over Range •UNDER = Under Range •N/A = Channel Disabled •CLIP = Clipping •Press: OK 47 ©2006-2008 PowerCET Corporation. All rights reserved.
DB-PX5 - PowerVisa 440® / PowerGuide® 4400 / PowerXplorer® PX5 Op. Skills ©2006-2008 PowerCET Corporation. All rights reserved. Meter Mode: Standard Meter Tab, Computed Basic •Press: Computed Basic •Lag (inductive) is plus, lead (capacitive) is minus when energy is delivered to the load •Residual Current = Vector sum of the phase currents w/o neutral •Net Current = Vector sum of the phase currents and neutral (i.e. leakage current) 49 ©2006-2008 PowerCET Corporation. All rights reserved.
DB-PX5 - PowerVisa 440® / PowerGuide® 4400 / PowerXplorer® PX5 Op. Skills ©2006-2008 PowerCET Corporation. All rights reserved. Meter Mode: Standard Meter Tab: Energy & Harmonics Press: Energy (parameter measured over time, starts as zero) Press: Harmonics 51 ©2006-2008 PowerCET Corporation. All rights reserved. Meter Mode: Standard Meter Tab, Flicker Press: Flicker (parameter measured over time, starts as zero) 52 © 2006-2010 by PowerCET Corporation. All rights reserved.
DB-PX5 - PowerVisa 440® / PowerGuide® 4400 / PowerXplorer® PX5 Op. Skills ©2006-2008 PowerCET Corporation. All rights reserved. Meter Mode: Distortion Meter Tab: THD & TID Press: Distortion Tab, THD RSS=root sum of square Press: TID (Total Interharmonic Distortion) 53 ©2006-2008 PowerCET Corporation. All rights reserved. Meter Mode: Distortion Meter Tab: TIF & Crest Factor Press: TIF (Telephone Influence Factor) Press: Crest Factor 54 © 2006-2010 by PowerCET Corporation. All rights reserved.
DB-PX5 - PowerVisa 440® / PowerGuide® 4400 / PowerXplorer® PX5 Op. Skills ©2006-2008 PowerCET Corporation. All rights reserved. Meter Mode: Distortion Meter Tab: Power & Transformer Press: Power Press: Transformer 55 ©2006-2008 PowerCET Corporation. All rights reserved. Harmonics: Graph From Home Screen, Press: Harmonics Icon 56 © 2006-2010 by PowerCET Corporation. All rights reserved.
DB-PX5 - PowerVisa 440® / PowerGuide® 4400 / PowerXplorer® PX5 Op. Skills ©2006-2008 PowerCET Corporation. All rights reserved. Harmonics: Graph Details •Press: Detail •Drag <- -> highlight (blue) area to harmonics of interest •Press the magnifying Glass 57 ©2006-2008 PowerCET Corporation. All rights reserved. Harmonics: Graph Options •Press: Options •Check Harmonics only if you are not interested in interharmonics •Check the desired graph units and scaling 58 © 2006-2010 by PowerCET Corporation.
DB-PX5 - PowerVisa 440® / PowerGuide® 4400 / PowerXplorer® PX5 Op. Skills ©2006-2008 PowerCET Corporation. All rights reserved. Harmonics: List •Press: List •Press Sort to organize by decreasing magnitude •Press Norm to toggle between normalized and unnormalized values 59 ©2006-2008 PowerCET Corporation. All rights reserved. Phasors •From Home screen, Press: Phasors •Demo displays animated phasor display 60 © 2006-2010 by PowerCET Corporation. All rights reserved.
DB-PX5 - PowerVisa 440® / PowerGuide® 4400 / PowerXplorer® PX5 Op. Skills ©2006-2008 PowerCET Corporation. All rights reserved. Phasors •Press: Demo •Demo displays animated phasor display Chooses Resistive / Inductive / Capacitive Load 61 ©2006-2008 PowerCET Corporation. All rights reserved. Contents: 1 Hardware and Basic Operation 2 Real-Time Monitoring 3 Long-Term Monitoring 4 Viewing Event Data on the 4400 / PX5 62 © 2006-2010 by PowerCET Corporation. All rights reserved.
DB-PX5 - PowerVisa 440® / PowerGuide® 4400 / PowerXplorer® PX5 Op. Skills ©2006-2008 PowerCET Corporation. All rights reserved. (3) Long-Term Monitoring •Setup a new circuit: Automatic Setup •Setup a new circuit: Wizard Setup •Save a setup template to a card •Load a setup template from a card 63 ©2006-2008 PowerCET Corporation. All rights reserved.
DB-PX5 - PowerVisa 440® / PowerGuide® 4400 / PowerXplorer® PX5 Op. Skills ©2006-2008 PowerCET Corporation. All rights reserved.
DB-PX5 - PowerVisa 440® / PowerGuide® 4400 / PowerXplorer® PX5 Op. Skills ©2006-2008 PowerCET Corporation. All rights reserved. Start Menu • On power up, 4400 & PX5 use the last used setup (note circuit type on status display for a reminder) •From Home Screen, Press: Start/Setup 67 ©2006-2008 PowerCET Corporation. All rights reserved. Setup Choices •Use Automatic Setup (Power Quality only). Press Probe if you need to change current probes. Or: •Use the Wizard Setup to manually setup the unit .
DB-PX5 - PowerVisa 440® / PowerGuide® 4400 / PowerXplorer® PX5 Op. Skills ©2006-2008 PowerCET Corporation. All rights reserved. Automatic Setup •Press: Automatic Setup •(auto setup runs) •Press: Summary to verify correct configuration •If necessary, Press: Probe to correct current probe selection •Press: OK, to go to Monitoring Screen, ready to start monitoring 69 ©2006-2008 PowerCET Corporation. All rights reserved.
DB-PX5 - PowerVisa 440® / PowerGuide® 4400 / PowerXplorer® PX5 Op. Skills ©2006-2008 PowerCET Corporation. All rights reserved. Automatic Setup: Monitoring On •While the instrument is actively monitoring data, the message MONITORING STATUS: ON appears on the top section of the Home screen •Events and Journal log entries are enumerated on status screen as they occur •Press: Stop to halt a monitoring session 71 ©2006-2008 PowerCET Corporation. All rights reserved.
DB-PX5 - PowerVisa 440® / PowerGuide® 4400 / PowerXplorer® PX5 Op. Skills ©2006-2008 PowerCET Corporation. All rights reserved. Default parameter settings by mode, continued 73 ©2006-2008 PowerCET Corporation. All rights reserved. Default parameter settings by mode, continued 74 © 2006-2010 by PowerCET Corporation. All rights reserved.
DB-PX5 - PowerVisa 440® / PowerGuide® 4400 / PowerXplorer® PX5 Op. Skills ©2006-2008 PowerCET Corporation. All rights reserved. Wizard Setup •From the Start Menu, Press: Wizard Setup 75 ©2006-2008 PowerCET Corporation. All rights reserved.
DB-PX5 - PowerVisa 440® / PowerGuide® 4400 / PowerXplorer® PX5 Op. Skills ©2006-2008 PowerCET Corporation. All rights reserved. Wizard Setup: Scale Factors •Enter a scale factor if appropriate: • Probe not on menu (choose other), • Measuring on the output of a potential transformer or current transformer • Using a Dranetz-BMI ISO box •Scale factors are calculated by dividing the output into the input (e.g. 1000:200 is 1000/200 =5) •Press Next when finished 77 ©2006-2008 PowerCET Corporation.
DB-PX5 - PowerVisa 440® / PowerGuide® 4400 / PowerXplorer® PX5 Op. Skills ©2006-2008 PowerCET Corporation. All rights reserved. Wizard Setup: Nominal Values •Verify/correct the nominal values which are used to set default thresholds •Press Tracking for frequency tracking options •Nominal frequency should match your line frequency •Nominal Current is whatever is detected on circuit. Set to your spec •Press Next when finished 79 ©2006-2008 PowerCET Corporation. All rights reserved.
DB-PX5 - PowerVisa 440® / PowerGuide® 4400 / PowerXplorer® PX5 Op. Skills ©2006-2008 PowerCET Corporation. All rights reserved. Wizard Setup: Mode of Operation •To record data, press: Continue and set limits... •then Press: Next •(Cancel discards changes and returns to Start menu) 81 ©2006-2008 PowerCET Corporation. All rights reserved.
DB-PX5 - PowerVisa 440® / PowerGuide® 4400 / PowerXplorer® PX5 Op. Skills ©2006-2008 PowerCET Corporation. All rights reserved. Wizard Setup: Monitoring Mode, cont. •...
DB-PX5 - PowerVisa 440® / PowerGuide® 4400 / PowerXplorer® PX5 Op. Skills ©2006-2008 PowerCET Corporation. All rights reserved. Wizard Setup: Advanced Options • The unit is now ready to begin monitoring and to record data in the memory card • Press: Next to accept defaults, or press to modify: • Transient Limit • RMS Variation Limit • Waveform Capture • Characterizer options • Journal Limit • Journal Interval 85 ©2006-2008 PowerCET Corporation. All rights reserved.
DB-PX5 - PowerVisa 440® / PowerGuide® 4400 / PowerXplorer® PX5 Op. Skills ©2006-2008 PowerCET Corporation. All rights reserved. Wizard Setup: PX5 Transient Limits-Hi Frequency Detectors* •The PX5's high frequency card allows it to capture highfrequency transients (>2µSec) •If applicable, Press: Group A B C to simplify setup •Press the limit field and enter the limit.
DB-PX5 - PowerVisa 440® / PowerGuide® 4400 / PowerXplorer® PX5 Op. Skills ©2006-2008 PowerCET Corporation. All rights reserved.
DB-PX5 - PowerVisa 440® / PowerGuide® 4400 / PowerXplorer® PX5 Op. Skills ©2006-2008 PowerCET Corporation. All rights reserved.
DB-PX5 - PowerVisa 440® / PowerGuide® 4400 / PowerXplorer® PX5 Op. Skills ©2006-2008 PowerCET Corporation. All rights reserved. Wizard Setup: RMS Variation Limits •If applicable, Press: Group A B C to simplify setup •Press the threshold parameter (High, Low, Very Low) to change, enable or disable threshold values 115A •High limits must be at least .1 higher than Low limits, or the entered value will not be accepted.
DB-PX5 - PowerVisa 440® / PowerGuide® 4400 / PowerXplorer® PX5 Op. Skills ©2006-2008 PowerCET Corporation. All rights reserved. Wizard Setup: Waveform Capture (cross triggering) •Waveform captures may be associated with voltage and current triggers •Press: Waveform Capture 95 ©2006-2008 PowerCET Corporation. All rights reserved.
DB-PX5 - PowerVisa 440® / PowerGuide® 4400 / PowerXplorer® PX5 Op. Skills ©2006-2008 PowerCET Corporation. All rights reserved. Wizard Setup: Waveform Capture (cross triggering) •Select the channels to capture waveforms when triggered by the left column parameter •Press: Clear to remove previous selections •Press: OK when finished •Press: OK again when finished with all the cross trigger grids to return to the Advanced Monitoring Screen 97 ©2006-2008 PowerCET Corporation. All rights reserved.
DB-PX5 - PowerVisa 440® / PowerGuide® 4400 / PowerXplorer® PX5 Op. Skills ©2006-2008 PowerCET Corporation. All rights reserved. Wizard Setup: Characterizer Options •Event data is measured in compliance with the criteria set by IEEE 1159 or IEC 61000-4-30 Class A •Press: None (Raw Data) if you do not want to characterize event data according to any measurement standard—uses less CPU time.
DB-PX5 - PowerVisa 440® / PowerGuide® 4400 / PowerXplorer® PX5 Op. Skills ©2006-2008 PowerCET Corporation. All rights reserved. Wizard Setup: Journal Limit •Journal categories are templates of journal settings for various applications •A complete list is available in chapter 6 of the manual •Press: Standard List •Only Standard List and Distortion are available on the PowerGuide 4400 & PowerVisa 440 101 ©2006-2008 PowerCET Corporation. All rights reserved.
DB-PX5 - PowerVisa 440® / PowerGuide® 4400 / PowerXplorer® PX5 Op. Skills ©2006-2008 PowerCET Corporation. All rights reserved.
DB-PX5 - PowerVisa 440® / PowerGuide® 4400 / PowerXplorer® PX5 Op. Skills ©2006-2008 PowerCET Corporation. All rights reserved. Wizard Setup: Journal Interval—Harmonics & Flicker •Harmonics: (minutes): OFF, 1, 2, 5, 10, 15, 60 [Press a category, then press repeatedly the parameter that you want to change to display the available selection values.
DB-PX5 - PowerVisa 440® / PowerGuide® 4400 / PowerXplorer® PX5 Op. Skills ©2006-2008 PowerCET Corporation. All rights reserved. Wizard Setup: Memory Card Facts • Setups templates are saved as filename.SET • Event data is saved as filename_xx.DDB • Maximum length for site/filenames is 32 characters.
DB-PX5 - PowerVisa 440® / PowerGuide® 4400 / PowerXplorer® PX5 Op. Skills ©2006-2008 PowerCET Corporation. All rights reserved. Wizard Setup: Finish, Begin Monitoring •Press: Start Now! to start an"open-ended" monitoring session and return to the Home Screen •Press: Monitor using Start and End times to schedule a defined monitoring period •Press: Save Setup Template to Card to save a copy of the current setup on the memory card (recommended) 109 ©2006-2008 PowerCET Corporation. All rights reserved.
DB-PX5 - PowerVisa 440® / PowerGuide® 4400 / PowerXplorer® PX5 Op. Skills ©2006-2008 PowerCET Corporation. All rights reserved. Monitoring On •While the instrument is actively monitoring data, the message MONITORING STATUS: ON appears on the top section of the Home screen •Event data is saved as filename_xx.
DB-PX5 - PowerVisa 440® / PowerGuide® 4400 / PowerXplorer® PX5 Op. Skills ©2006-2008 PowerCET Corporation. All rights reserved. Monitoring using Start and End Times •Press: Monitor using Start and End times to schedule a defined monitoring period 113 ©2006-2008 PowerCET Corporation. All rights reserved. Monitoring using Start and End Times •Press: Date and Time buttons to schedule a defined monitoring period Press: OK 114 © 2006-2010 by PowerCET Corporation. All rights reserved.
DB-PX5 - PowerVisa 440® / PowerGuide® 4400 / PowerXplorer® PX5 Op. Skills ©2006-2008 PowerCET Corporation. All rights reserved. Monitoring using Start and End Times •After specifying the Start and End time/date of monitoring, the message MONITORING STATUS: ARMED appears on screen •Monitoring will start & stop at the specified time and dates •Monitoring can be stopped early by pressing: STOP 115 ©2006-2008 PowerCET Corporation. All rights reserved.
DB-PX5 - PowerVisa 440® / PowerGuide® 4400 / PowerXplorer® PX5 Op. Skills ©2006-2008 PowerCET Corporation. All rights reserved. Checking the Annunciator Panel •After starting a monitoring session, press the Reports icon and then the Status icon to display the Summary report via the Annunciator panel 117 ©2006-2008 PowerCET Corporation. All rights reserved.
DB-PX5 - PowerVisa 440® / PowerGuide® 4400 / PowerXplorer® PX5 Op. Skills ©2006-2008 PowerCET Corporation. All rights reserved. Workbook Modules: 1 Hardware and Basic Operation 2 Real-Time Monitoring 3 Long-Term Monitoring 4 Viewing Data on the 440 / 4400 / PX5 119 ©2006-2008 PowerCET Corporation. All rights reserved. Viewing Data on the 4400 / PX5: •Viewing Events •Viewing Trends •Viewing Reports 120 © 2006-2010 by PowerCET Corporation. All rights reserved.
DB-PX5 - PowerVisa 440® / PowerGuide® 4400 / PowerXplorer® PX5 Op. Skills ©2006-2008 PowerCET Corporation. All rights reserved. Loading Event Data from Memory Card •You must load event data or be currently monitoring to view events •To load event data: • From the Start Menu, press: Load data from card •Files on memory card are displayed ordered by date and time of creation •Press the desired event file to highlight it •Press: OK 121 ©2006-2008 PowerCET Corporation. All rights reserved.
DB-PX5 - PowerVisa 440® / PowerGuide® 4400 / PowerXplorer® PX5 Op. Skills ©2006-2008 PowerCET Corporation. All rights reserved. Viewing Trend Data Trends –A graph of parameters and channels over time –Shows a macro view interface of timespan, trigger conditions, and channels of data that were recorded –Only Standard and Distortion trends are available on the PowerGuide 4400 123 ©2006-2008 PowerCET Corporation. All rights reserved.
DB-PX5 - PowerVisa 440® / PowerGuide® 4400 / PowerXplorer® PX5 Op. Skills ©2006-2008 PowerCET Corporation. All rights reserved. Viewing Events •Press: Events to view event list, graphs and waveform/RMS plots 125 ©2006-2008 PowerCET Corporation. All rights reserved. Event Classifications: Short Duration 126 © 2006-2010 by PowerCET Corporation. All rights reserved.
DB-PX5 - PowerVisa 440® / PowerGuide® 4400 / PowerXplorer® PX5 Op. Skills ©2006-2008 PowerCET Corporation. All rights reserved. Event Classifications: Long Duration 127 ©2006-2008 PowerCET Corporation. All rights reserved. Event Classifications: Transient 128 © 2006-2010 by PowerCET Corporation. All rights reserved.
DB-PX5 - PowerVisa 440® / PowerGuide® 4400 / PowerXplorer® PX5 Op. Skills ©2006-2008 PowerCET Corporation. All rights reserved. Event Classifications: Waveform Distortion 129 ©2006-2008 PowerCET Corporation. All rights reserved. Viewing Events: Screen Layout 130 © 2006-2010 by PowerCET Corporation. All rights reserved.
DB-PX5 - PowerVisa 440® / PowerGuide® 4400 / PowerXplorer® PX5 Op. Skills ©2006-2008 PowerCET Corporation. All rights reserved. Viewing Events: Event Activity Graph •The event graph is located on the top section of the event screen •Four timelines represent all events recorded from the time monitoring started •Voltage events are displayed above the grid and current channels below 131 ©2006-2008 PowerCET Corporation. All rights reserved.
DB-PX5 - PowerVisa 440® / PowerGuide® 4400 / PowerXplorer® PX5 Op. Skills ©2006-2008 PowerCET Corporation. All rights reserved. Viewing Events: Event Detail •Press: Detail •Event Details appear at the top of the screen •To zoom in on the RMS plot, •Press: Magnify 133 ©2006-2008 PowerCET Corporation. All rights reserved.
DB-PX5 - PowerVisa 440® / PowerGuide® 4400 / PowerXplorer® PX5 Op. Skills ©2006-2008 PowerCET Corporation. All rights reserved. Viewing Events: Magnify •The magnified plot can be zoomed further in or out using the (+) and (-) buttons •Drag the sides of the zoom box to expand or contract the graph •Press the (+ or -) magnify button to zoom in or out 135 ©2006-2008 PowerCET Corporation. All rights reserved.
DB-PX5 - PowerVisa 440® / PowerGuide® 4400 / PowerXplorer® PX5 Op. Skills ©2006-2008 PowerCET Corporation. All rights reserved. Viewing Events: Options •Press: Options to change the channels that are plotted •The event screen retains your settings, but reverts to defaults when a new monitoring session starts •Press: Exit to return to Home Screen 137 ©2006-2008 PowerCET Corporation. All rights reserved.
DB-PX5 - PowerVisa 440® / PowerGuide® 4400 / PowerXplorer® PX5 Op. Skills ©2006-2008 PowerCET Corporation. All rights reserved. Viewing Trends: Screen Layout 139 ©2006-2008 PowerCET Corporation. All rights reserved. Viewing Trends: •The default number of plots displayed in the trend screen is two •Press the Magnify button to view plot coordinates in detail 140 © 2006-2010 by PowerCET Corporation. All rights reserved.
DB-PX5 - PowerVisa 440® / PowerGuide® 4400 / PowerXplorer® PX5 Op. Skills ©2006-2008 PowerCET Corporation. All rights reserved. Viewing Trends: Magnified •The magnified plot can be zoomed further in or out using the (+) and (-) buttons •Drag the sides of the zoom box to expand or contract the graph •Press the (+ or -) magnify button to zoom in or out 141 ©2006-2008 PowerCET Corporation. All rights reserved.
DB-PX5 - PowerVisa 440® / PowerGuide® 4400 / PowerXplorer® PX5 Op. Skills ©2006-2008 PowerCET Corporation. All rights reserved. Viewing Trends: Parameter/Channel Selection •Press the category from which you want to select parameters/ channels to plot •Or Press: Disable to clear the parameter display on the previous screen and return to it •Cancel returns to previous screen w/o changes 143 ©2006-2008 PowerCET Corporation. All rights reserved.
DB-PX5 - PowerVisa 440® / PowerGuide® 4400 / PowerXplorer® PX5 Op. Skills ©2006-2008 PowerCET Corporation. All rights reserved. Viewing Trends: Parameter/Channel Selection •The modified trend plots are displayed •Press: Magnify to enlarge the area of interest •Drag the sides of the zoom box to expand or contract the graph •Press the (+ or -) magnify button to zoom in or out 145 ©2006-2008 PowerCET Corporation. All rights reserved.
DB-PX5 - PowerVisa 440® / PowerGuide® 4400 / PowerXplorer® PX5 Op. Skills ©2006-2008 PowerCET Corporation. All rights reserved. Viewing Reports •Press: Report 147 ©2006-2008 PowerCET Corporation. All rights reserved. Viewing Reports •Reports present Quality of Service (QOS) data in either EN50160 format or simple PQ status •Press: Report •Press: Status 148 © 2006-2010 by PowerCET Corporation. All rights reserved.
DB-PX5 - PowerVisa 440® / PowerGuide® 4400 / PowerXplorer® PX5 Op. Skills ©2006-2008 PowerCET Corporation. All rights reserved. The Annunciator Panel •Green indicates no events have occurred in that category since start of monitoring period or last time clear button was pressed •Any other color indicates that thresholds have been passed. •Press: A parameter and then View Graph 149 ©2006-2008 PowerCET Corporation. All rights reserved.
DB-PX5 - PowerVisa 440® / PowerGuide® 4400 / PowerXplorer® PX5 Op. Skills ©2006-2008 PowerCET Corporation. All rights reserved. Viewing Reports Reports also present Quality of Service (QOS) data in EN50160 format Press: EN50160 Note: You must have collected data in EN50160 format (monitoring mode screen) to view it here 151 ©2006-2008 PowerCET Corporation. All rights reserved.