Specifications

automotive tools
workshop equipment

94
Prices are list, each and exclude VAT.
ATJ2/CBA
2 Tonne Cross Beam Adaptor
Provides extra safety when locating awkward jacking
points. Ideal for front wheel drive vehicles. For use with
Draper Trolley Jack, Stock No. 37174. Carton packed.
Specification:
Overall length (min.) ... 580mm
Overall length (max.) ... 810mm
Saddle elevation (max.) ... 50mm
Saddle size ... 120 x 120mm
Stock Euro GBP £
No. each each
56756 €94.71 £63.14
1
ATJ2/TC
200kg Transmission Cradle
For use with Draper Trolley Jack Stock No.37174.
Carton packed.
Specification:
Load (max.) ... 200kg
Width ... 430mm
Length (min.) ... 267mm
Length (max.) ... 375mm
Height ... 350mm
Saddle tilt ... 30-10°
Weight ... 13.5kg
Stock Euro GBP £
No. each each
56758 €72.27 £48.18
2
RWC
Rubber Wheel Chocks
Pair of chocks to prevent vehicles moving whilst jacked
up or on a slope. Display carton.
Stock Euro GBP £
No. per pair per pair
54500 €11.22 £7.48
3
TJ2
2 Tonne Trolley Jack
Manufactured to EN1494 Specification.
Light duty design with integral American-style release
mechanism. Fitted with heavy duty rear swivelling
castor wheels and large saddle to aid positioning under
the vehicle. The jack incorporates a safety overload and
bypass valves to prevent the handle locking at the
maximum ram extension. Display carton.
Specification:
Capacity ... 2 tonnes (2000kg)
Lifting range ... 130 - 380mm
Overall size ... 535 x 225 x 145mm
Length ... 545mm
Weight ... 12kg
Supplied complete with one piece handle.
Stock Euro GBP £
No. each each
37036 €59.16 £39.44
5
TJ2AP
2 Tonne Light Duty Trolley Jack
Ideal for home use. Rear swivelling castors and large
saddle to aid positioning under the vehicle. Display
carton.
Specification:
Capacity ... 2 tonnes (2000kg)
Lifting range ... 130- 350mm
Overall size ... 492 x 218 x 132mm
Weight ... 10.5kg
Supplied complete with one piece handle
Stock Euro GBP £
No. each each
59340 €50.58 £33.72
6
SEE PAGE 93 ITEM No. 6
FOR TROLLEY JACK
SUITABLE FOR USE WITH
ITEM Nos. 1 AND 2
(STOCK No. 37174)
TJ2/QL
2 Tonne General Duty Trolley Jack with
'Quick Lift' Facility
Manufactured to EN1494 Specification.
General duty 'Quick Lift' trolley jack. The 'quick lift'
gives extra lift per stroke of the jack handle thereby
requiring less effort to achieve the required height.
Fitted with rear swivelling castor wheels and large
saddle to aid positioning under the vehicle. The jack
incorporates safety overload and bypass valves to
prevent the handle locking at the maximum ram
extension. Display carton.
Specification:
Capacity ... 2 tonnes (2000kg)
Lifting range ... 135 - 385mm
Overall size ... 550 x 212 x 140mm
Supplied complete with one piece handle.
Stock Euro GBP £
No. each each
63205 €71.76 £47.84
4
LIFTING
HANDLE
LIFTING
HANDLE
LIFTING
HANDLE
norman says
SAFETY OVERLOAD
PROTECTION
Jacks are rated to lift a certain
load and for your safety all
Draper jacks are fitted with Safety
Overload Protection. If the load you
are trying to lift is heavier than the capacity of the
jack the Safety Overload Protection will prevent the
jack from operating, saving any possible damage to
the jack or
possible injury to
the user. Never
work under an
unsupported jack
and always use a
jack that is
correctly rated
for the
application.
1
2
4
5
6