Specifications

TJ200T
150kg Floor Transmission Jack
Manufactured to EN1570 Specification.
Suitable for lifting and lowering gearboxes and
differential units. The scissor-type design provides
precise movement allowing the user to accurately
manoeuvre and fit the transmission assembly. Four
heavy duty swivel castors provide flexibility of
movement within the workplace. Carton packed.
Specification:
Capacity ... 150kg
Minimum height ... 170mm
Maximum height ... 570mm
Base width ... 420mm
Base length ... 410mm
Weight ... 17kg
Stock Euro GBP £
No. each each
53095 €183.00 £122.00
1
automotive tools
workshop equipment

96
Prices are list, each and exclude VAT.
TJ600TV
600kg Vertical Transmission Jack
Manufactured to EN 1494 Specifications.
For use in the garage workshop. This model features
high speed lift foot pedal. Hand operated precision
release incorporating overload safety valve, large
diameter wheels for easy manoeuvrability. Carton
packed.
Specification:
Capacity ... 600kg
Stroke ... 700mm
Height (min) ... 1175mm
Height (max.) ... 1985mm
Base width ... 560mm
Base length ... 570mm
Weight ... 39kg
Stock Euro GBP £
No. each each
56731 €457.50 £305.00
2
ES450
450kg Engine/ Transmission Stand
This stand will accept a wide variety of engines and
transmissions. The swivelling head (360°) gives
accessibility to all parts of the engine. Fully adjustable
mounting arms. The two front castors of the ‘H’ frame
base allow the stand to be moved around the
workplace. Carton packed.
Specification:
Capacity ... 450kg
Width Front ... 400mm
Rear ... 800mm
Overall length ... 800mm
Height ... 910mm
Weight ... 21kg
Stock Euro GBP £
No. each each
53092 €99.54 £66.36
3
ES300
300kg Universal Engine/Gearbox Support
Allows work to be carried out on front wheel
drive/transmission/drive shafts with engine suspended
in-situ. Adjustable extension arms with locking feature.
Neoprene support pads and adjustable screw. Carton
packed.
Specification:
Capacity ... 300kg
Maximum extended width ... 1550mm (approx.)
Minimum width ... 1100mm (approx.)
Screw depth ... 300mm
Stock Euro GBP £
No. each each
53094 €112.38 £74.92
4
ES500
500kg Universal Engine/Gearbox Support
Allows work to be carried out on front wheel
drive/transmission/drive shafts with engine suspended
in-situ. Adjustable extension arms with locking feature.
Neoprene support pads and adjustable screws. Carton
packed.
Specification:
Capacity ... 500kg
Maximum extended width ... 1550mm (approx.)
Minimum width ... 1100mm (approx.)
Screw depth ... 300mm
Stock Euro GBP £
No. each each
61033 €135.03 £90.02
5
LL500
Load Leveller for Engine Crane
Suitable for levelling off centre loads quickly and easily.
For use with Draper Stock No.53091 and 63285 Engine
Cranes and other manufacturers similar cranes. Carton
packed.
Stock Euro GBP £
No. S.W.L. each each
56730 500kg €56.19 £37.46
6
closed
open
4
5
6