Specifications

automotive tools
specialist automotive socketry

100
Prices are list, each and exclude VAT.
LSS7
7 piece
3
/8,
1
/2" Sq. Dr. 'Lamba' or Oxygen
Sensor Socket Set
Expert Quality , for removal, inspection or replacement
of heated and non-heated oxygen sensors fitted to the
following vehicle marques; Audi, BMW, Citroën,
Mercedes, Peugeot, Renault, Skoda, Vauxhall/Opel (GM)
and Volkswagen. Cut-away sections allow some sockets
to fit over wiring harnesses. Sockets have black
phosphate finish. Display packed in blow moulded case.
Contents:
3
/ 8 " Square Drive
•
3
/ 8 " x 80mm deep socket with 7.7mm wide long groove
•
3
/ 8 " x 90mm deep socket with 20.5mm wide long groove
• Offset square drive socket with 8.6mm wide full length
groove
•1.
1
/ 16 " x 74mm deep socket
1
/ 2 " Square Drive
• Offset square drive deep socket 22 x 49.5mm with 11mm
wide full length groove
• 27 x 85mm deep socket with large side viewing window
• 29 x 90mm deep socket with 8.2mm wide long groove
Stock Euro GBP £
No. per set per set
89765 €78.27 £52.18
1
AWNSS/3
1
/2" Sq. Dr. Draper Expert Hi-Torq Wheel
Nut Sockets for Alloy Wheels
Expert Quality , set of three 6 point Draper Expert HI-
TORQ sockets sizes 17, 19 and 21mm. Manufactured
from chrome molybdenum steel hardened and
tempered. Sleeved with nylon internally and externally
to prevent damage to wheels and nuts. Supplied in
handy blow mould case with display sleeve.
Draper Expert HI-TORQ is a trademark of Draper Tools Ltd.
Stock Euro GBP £
No. per set per set
59080 €39.78 £26.52
2
Specialist Automotive Sockets
The table below shows the range of Expert Quality specialist sockets. Some sockets are impact and can be used with air or electric power tools.
Every effort has been made to ensure that the applications shown in this publication are accurate and include all current car/van models.
22mm
3
/ 8 " Sq. Dr. Oxygen Sensor Socket
Expert Quality, for oxygen sensors. Special slot in the side of socket for sensor wire clearance. Also suitable for
diesel injectors found in Mitsubishi, Nissan, Opel, Vauxhall and VW vehicles. Manufactured from chrome vanadium
steel hardened, tempered and chemically blacked for corrosion protection. Display packed.
12.5mm
1
/ 2 " Sq. Dr. Pentagon Impact Socket
Expert Quality, five point (pentagon) impact socket for the bendix brakes on Citroën and Peugeot vehicles. Each
side of the pentagon is 12.5mm. Forged from chrome molybdenum steel hardened, tempered and chemically
blacked for corrosion protection. Display packed.
22mm
1
/ 2 " Sq. Dr. Diesel Injector Socket
Expert Quality, 6 point socket for the removal of diesel injectors fitted to GM (Vauxhall/Opel) Mitsubishi, Nissan
and Volkswagen vehicles. Forged from chrome vanadium steel hardened, tempered, chrome plated and polished
for corrosion protection. Display packed.
26mm
1
/ 2 " Sq. Dr. Hub Nut Impact Socket
Expert Quality, 12 point socket forged from chrome vanadium steel hardened, tempered and chemically blacked
polished for corrosion protection. For use on Audi and Volkswagen models. Display packed.
27mm
1
/ 2 " Sq. Dr. Diesel Injector Socket
Expert Quality, 6 point socket for the removal of M24 threaded injectors fitted to many car and light commercial
diesel engines. Forged from chrome vanadium steel hardened, tempered, chrome plated and polished for
corrosion protection. Display packed.
28mm
1
/ 2 " Sq. Dr. HGV Diesel Injector Socket
Expert Quality, 12 point socket for the removal of diesel injectors from HGV’s including Scania and Volvo. Forged
from chrome vanadium steel hardened, tempered, chrome plated and polished for corrosion protection. Display
packed.
30mm
1
/ 2 " Sq. Dr. Hub Nut Socket
Expert Quality, 6 point socket for hub nuts. Fits Audi, Citroën, Fiat, Ford, GM (Vauxhall/Opel), Lada, Peugeot,
Renault, Talbot and Volkswagen models. Forged from chrome vanadium steel hardened, tempered, chrome plated
and polished for corrosion protection. Display packed.
30mm
1
/ 2 " Sq. Dr. Hub Nut Impact Socket
Expert Quality, 12 point socket forged from chrome vanadium steel hardened, tempered and chemically blacked
polished for corrosion protection. For use on Audi and Volkswagen models. Display packed.
32mm
1
/ 2 " Sq. Dr. Hub Nut Socket
Expert Quality, 6 point socket for hub nuts. Fits Audi, Citroën, Fiat, Ford, GM (Vauxhall/Opel), Lada, Peugeot,
Renault, Talbot and Volkswagen models. Also driveshaft on Rover 200/400 models and Mercedes 7.5 tonne and
over commercial vehicles. Forged from chrome vanadium steel hardened, tempered, chrome plated and polished
for corrosion protection. Display packed.
35mm
1
/ 2 " Sq. Dr. Hub Nut Socket
Expert Quality, 6 point socket for hub nuts on Citroën BX, Xantia and Peugeot J7/J9 vehicles. Forged from chrome
vanadium steel hardened, tempered, chrome plated and polished for corrosion protection. Display packed.
Sq. Stock Part Euro GBP £
Drive No. No. Description each each
1
3
/8" 55540 DT-OXY €10.20 £6.80
2
1
/2" 55993 410D-MM €5.16 £3.44
3
1
/2" 39046 HTD-MM €9.27 £6.18
4
1
/2" 71392 410D-MM €7.95 £5.30
5
1
/2" 16216 HTD-MM €9.48 £6.32
6
1
/2" 21833 HTD-MM €10.92 £7.28
7
1
/2" 22192 HTD-MM €10.11 £6.74
8
1
/2" 71393 410D-MM €10.29 £6.86
9
1
/2" 35521 HTD-MM €10.11 £6.74
10
1
/2" 39047 HTD-MM €10.32 £6.88
1 2 3 4 5 6 7 8 9 10