Owner`s manual

- 7 -
REPLACEMENT OF ABRASIVE BELT
In order to replace the belt remove plug from
power supply. Pull the lever ✭✌ as illustrated
(Fig.7), extract the worn belt ✯✌ and replace it
with another original Draper belt, positioning it so
that the internal stamped arrows are facing in the
direction of arrow ✯✌. In order to fit the belt,
repeat the same operation in reverse order but
ensure you follow the directions on centering the
belt (page 6) before using.
IMPROPER USE
The functions and use of this tool are those
exclusively indicated in this manual.
ANY OTHER USE OF THE TOOL IS EXPLICITY
FORBIDDEN.
Fig.7
✭✌
✮✌
✯✌
OPERATION & USE