Installation Instructions

Assembly/Installation Instructions
Orbiter Projector Lift Plenum Housing by Draper
Copyright ©2006 Draper Inc. Form OrbiterPlenum_Inst06 Print ed in U.S.A.
If you encounter any diffi culties installing your Orbiter Plenum
Housing, call your dealer or Draper, Inc. in Spiceland, In di ana, 765-
987-7999, fax [phone], or E-mail [e-mail].
Item Quan
t
1 1
2 1
3
4
5
6
7
8
9
11
1
Installing Optional Plenum Housing
The Plenum Housing is shipped in pieces, and must be as-
sembled by the installer. It is recommended that an access panel be
installed in the ceiling to allow future access.
➀ Attach Plenum panels to projector lift (see above drawing).
➁ Attach assembly to overhead structure. Allow clearance between
plenum top and structure for ease of future access.
➂ Knock-outs are provided to allow cables in and out of plenum
housing.
Item Quantity Description
1 1 Orbiter
2 1 Orbiter plenum (individual pieces listed below)
3 2 End Plenum Panel
4 1 Front Plenum Panel
5 1 Top Plenum Panel
6 1 Lower Large Plenum Panel
7 1 Lower Small Plenum Panel
8 1 Rear Side Plenum Panel
9 26 #8-32 x.375 Zinc Hex Head Screw/Washer
10 8 #10-32 x.375 Zinc Hex Head Screw/Washer
11 26 #8-32 Zinc Keps Nu
t
Plenum
Knock-out
for cable entry
Plenum
Knock-out
for cable entry