Satellite TV System User Manual

ManualsBrandsDraper ManualsCar Video SystemDraper Satellite TV System 3010

WARNING: INSTALLATION OF THIS PRODUCT NEAR POWER LINES IS DANGEROUS.

FOR YOUR SAFETY, READ THE ENCLOSED “DANGER” BOOKLET BEFORE BEGINNING YOUR INSTALLATION.

Instruction Guide for Installation

Model 3010

UHF/VHF/FM

• HDTV

• Digital

• Analog

Summary of content (4 pages)

PAGE 1
Instruction Guide for Installation Model 3010 UHF/VHF/FM • HDTV • Digital • Analog WARNING: INSTALLATION OF THIS PRODUCT NEAR POWER LINES IS DANGEROUS. FOR YOUR SAFETY, READ THE ENCLOSED “DANGER” BOOKLET BEFORE BEGINNING YOUR INSTALLATION.
PAGE 2
TOOLS YOU WILL FIND HANDY • Adjustable Wrench • Pliers WHERE TO MOUNT YOUR ANTENNA Your antenna can be mounted on either the chimney, the roof, or on an outside wall or in an attic. Choose the method that best suits your particular location. Mast tube size should be 1.25” to 1.66” outside diameter. TRANSMISSION LINE 75 Ohm coaxial cable. RG-6 if running long distance. RG-6 or RG-59 for short distance. ASSEMBLING ANTENNA STEP 1: Remove the bottom cover from the unit.
PAGE 3
FIGURE C Recess for snap fit FIGURE D Cover Channel Master + + Inside Housing Bosses for M4 x 10mm screws (2) + + Cover tab slots (2) Four M6 x 12mm screws and M6 external tooth lockwashers from hardware bag Cover Tabs (2) Inside rear wall MOUNTING ANTENNA Mount the antenna on the mast using nest bracket and (2) bolts provided. Locate “F” connector on underside of housing. Screw on the mating cable connector (do not overtighten or allow unsupported cable to dangle from antenna connector).
PAGE 4
ATTIC MOUNT INSTALLATION A GUYED ROOF MOUNT INSTALLATION B C C G D B CHIMNEY MOUNT INSTALLATION F WALL MOUNT INSTALLATION TRIPOD MOUNT INSTALLATION B C D B C B D M I L A D C O J K H E E N A-Roof Mount B-Mast C-Transmission Wire D-Snap-On Standouts E-Screw-In Standouts F-Guy Wire G-Guy Ring & Clamp H-Eyebolts I-Chimney Mount Straps J-Chimney Mount K-Ground Mount L-Wall Mount M-Tripod Mount N-Pitch Pads O-Lag Screws WARNING: INSTALLATION OF THIS PRODUCT NEAR POWER LINES IS DANGEROUS.