Operating instructions

ManualsBrandsDraper ManualsHousehold AppliancesWDV8

WET & DRY

VACUUM CLEANER

■ STOCK No.59311 ■ PART No.WDV8

• INSTRUCTIONS •

IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY TO ENSURE THE

SAFE AND EFFECTIVE USE OF THIS TOOL.

GENERAL INFORMATION

This manual has been compiled by Draper Tools and is an integrated part of the power tool equipment, which

should be kept with the machine. This manual describes the purpose for which this tool has been designed and

contains all the necessary information to ensure its correct and safe use.We recommend that this manual is read

before any operation of the machine, before performing any kind of adjustment to the machine, and prior to any

maintenance tasks. By following all the general safety instructions contained in this manual, it will ensure both

machine and operator safety, together with longer life of the tool itself.

All photographs and drawings in this manual are supplied by Draper Tools to help illustrate the operation of the

machine. Whilst every effort has been made to ensure accuracy of information contained in this manual, the Draper

Tool policy of continuous improvement determines the right to make modifications without prior warning.

02/2000

Summary of content (12 pages)

PAGE 1
WET & DRY VACUUM CLEANER ■ STOCK No.59311 ■ PART No.WDV8 • INSTRUCTIONS • IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY TO ENSURE THE SAFE AND EFFECTIVE USE OF THIS TOOL. 02/2000 GENERAL INFORMATION This manual has been compiled by Draper Tools and is an integrated part of the power tool equipment, which should be kept with the machine. This manual describes the purpose for which this tool has been designed and contains all the necessary information to ensure its correct and safe use.
PAGE 2
WET & DRY VACUUM CLEANER ■ STOCK No.59311 CONTENTS: ■ PART No.WDV8 Page No. Declaration of Conformity ................................................................................1 Specification/Guarantee...................................................................................2 General Safety Instructions ..............................................................................3 Power Supply ...............................................................................................
PAGE 3
SPECIFICATION The Draper Tools policy of continuous improvement determines the right to change specification without notice. Part No. ..................................................................................................................WDV8 Stock No ..................................................................................................................59311 Weight (without accessories) ......................................................................................5kg Voltage....
PAGE 4
GENERAL SAFETY INSTRUCTIONS FOR POWER TOOLS WARNING Please read the following instructions carefully, failure to do so could lead to serious personal injury. IMPORTANT Draper Tools Limited recommends that this machine should not be modified or used for any application other than that for which it was designed. If you are unsure of its relative applications do not hesitate to contact us in writing and we will advise you. 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14.
PAGE 5
POWER SUPPLY CONNECTING YOUR MACHINE TO THE POWER SUPPLY: (240V) To eliminate the possibility of an electric shock your machine has been fitted with a BS approved, non rewireable moulded plug and cable which incorporates a fuse, the value of which is indicated on the pin face of the plug. Should the fuse need to be replaced an approved BS1362 fuse must be used of the same rating, marked thus . The fuse cover is detachable, never use the plug with the cover omitted.
PAGE 6
UNPACKING AND CHECKING CONTENTS WARNING For your own safety, do not connect the plug to the power supply until all the assembly steps are completed and you have read and understood the safety and operational instructions. Carefully unpack the vacuum cleaner and all the loose items from the carton. Fig.1. illustrates the vacuum cleaner and all the loose parts packed in the carton. Referring to Fig.1. Check that all the parts are present. Fig.1.
PAGE 7
KNOW YOUR VACUUM CLEANER 1. 2. 3. 4. 5. 6. Carrying handle Carrying strap Motor housing On-Off switch Float valve Cloth filter 7. 8. 9. 10. 11. 12. Paper dust bag Receptacle Locking clips Hose socket Castors Hose adaptor ✕✌ ✘✌ ✗✌ ✜✌ ✢✌ ✖✌ ✕✔✌ ✕✖✌ ✙✌ ✛✌ ✚✌ ✕✕✌ For full details of vacuum accessories see page 10.
PAGE 8
ASSEMBLY NOTE: Before assembly can take place, remove accessories from inside of receptacle. 1. Firmly press the three castors ✪✌ into the base of the receptacle ✫✌ Fig.2. Fig.2. ✪✌ ✫✌ 2. Connect the flexible hose ✬✌ to the receptacle ✫✌ by pushing into the hose connector ✭✌ Fig.3. Fig.3. ✬✌ ✫✌ ✭✌ 3. Connect the hose ✬✌ to the extension tube ✮✌ by pushing them together Fig.4. Fig.4. ✮✌ 4. Hose extension tubes and accessories can be connected by hand pressure.
PAGE 9
OPERATING INSTRUCTIONS VACUUMING DRY DIRT AND DUST Fig.7. 1. The vacuum is supplied with a cloth filter ✱✌ and a paper dust bag ✳✌. ✱✌ ✳✌ 2. Fix the paper dust bag ✴✌ to the inner side of the hose connect in the receptacle (see Fig 8 & 9). When using a paper dust bag the dirt can be removed more hygienically and the life of the cloth filter will be prolonged Fig.8. ✴✌ Fig.9.
PAGE 10
OPERATING INSTRUCTIONS CONT.. VACUUMING FLUIDS Fig.10. 1. Empty the receptacle ✵✌ and remove the dust bag ✴✌ Fig10. ✵✌ ✴✌ Fig.11. 2. Remove the cloth filter Fig 11. NOTE: Motor damage could occur if the filter is not removed when vacuuming fluids. Fig.12. 3. In order to ensure adequate air flow never immerse the accessories completely in the fluid Fig 12. Fig.13. 4. When the fluids have reached the highest permitted level in the receptacle the float regulator ✶✌ Fig 13.
PAGE 11
MAINTENANCE IMPORTANT: Before any maintenance work, unplug vacuum from mains supply. • ATTENTION: EXPLOSION AND FIRE HAZARD! Never vacuum asbestos, inflammable fluids, such as petrol, oil, solvents, etc. Do not work near inflammable fluids or gas. Never vacuum fluids or material hotter than 60ºC, such as burning cigarettes, ashes, glowing coals, etc. • If cable becomes damaged replace immediately. • Always keep the cloth filter clean for maximum performance. • Empty receptacle regularly.
PAGE 12
DRAPER TOOLS LIMITED, Hursley Road, Chandler's Ford, Eastleigh, Hants. SO53 1YF. England. Tel: (023) 8026 6355. Fax: (023) 8026 0784. HELPLINE (023) 8049 4344 YOUR DRAPER STOCKIST ©Published by Draper Tools Ltd. No part of this publication may be reproduced, stored in a retrieval system or transmitted in any form or by any means, electronic, mechanical photocopying, recording or otherwise without prior permission in writing from Draper Tools Ltd.