Manual

ENGLISH
TOOLS NEEDED:
13mm Socket & Ratchet or
13mm Wrench, Test-probe
1. Open the vehicle’s rear tailgate. On the
driver's side, remove access panels,
threshold, trunk floor panels and trays
de
. Set aside all items removed being
careful not to damage parts.
2. On the driver's side, locate the vehicle's
factory tow harness connector. Separate
these connectors, being careful not to
break the locking tabs. Check to see that
the mating surfaces of the vehicle harness
connectors match the Tow-Plug Adapter
ends. All connector surfaces should be
clean and free of dirt.
3. Insert the Tow-Plug Adapter and
lock into place
f
. Be careful not to
damage the locking tabs and be sure
that connectors are fully inserted with
locking tabs in place.
4. Locate the existing ground stud. Loosen
bolt, place screw eyelet on stud and
re-tighten bolt
g
.
5. Consulting your owner's manual, locate
the Towing Fuse location and insert the
10A fuse (provided).
18248-037 Rev. A 07/30/04
Installation Instructions
Directives de Montage
Instrucciones de Instalación
Tow-Plug Adapter
Adaptateur de Fiche de Remorque
Adaptador Para Remolque
READ THIS FIRST:
Read and follow all instructions carefully
before beginning installation.
LISEZ CECI EN PREMIER:
Lire et suivre toutes les instructions
attenrivement avant le montage.
LEA ESTO PRIMERO:
Lea y siga todas las instrucciones cuidadosa-
mente antes de iniciar la instalación.
WARNING
All connections must be complete for the
Tow-Plug Adapter to function properly. Test
and verify installation with a test light or
trailer once installed.
6. On the driver's side, mount the black
box using the double-sided tape provided.
Secure the remainder of the harness with
the cable ties provided
h
. To prevent
damage or rattling, be careful to avoid
any areas that would cut or pinch the wire.
7. Reposition the trays, trunk floor panels and
access panels and reattach the threshold.
NOTE
Store 4-Flat in trunk or rear cargo area
when not in use.
WARNING
Overloading circuit can cause fires. DO
NOT exceed lower of towing manufacturer
rating or:
• Max. stop/turn light: 1 per side (2.1 amps)
• Max. tail lights: (5 amps)
Read vehicle's owners manual &
instruction sheet for additional information.
•
d
•
e
•
g
•
f
•
h