Manual

ManualsBrandsDraw-Tite ManualsCar4435 GOOSENECK RAIL KIT

Installation Instructions

GOOSENECK MOUNTING KIT

Dodge Ram 2500/3500 Heavy Duty

Short & Long Bed

All Me

acabs

Part Numbers:

4435

Equipment Required:

Fastener Kit: 4435F

Wrenches: 3/4, 15/16

Drill Bits: 1/4”

Other Tools: Drill

WARNING: Under no circumstances do we recommend

exceeding the towing vehicle manufacturers recommended vehicle

towing capacity.

9464/9474 HIDE-A-GOOSE HITCH

INSTALLATION

All Fasteners T

pical, Both Sides

5/8” Fasteners from

Hide-A-Goose Hitch

Fastener Kit

Vehicle Forward

After installing

bracket, reattach

round wire

Figure 1

(

)

Hex Nut

5/8”-11

(

)

U-Bolt

1/2”

z 2007, 2008, 2009, 2010 Cequent Performance Products

Sheet 1 of 8 4435N 1-12-10 Rev. J

Qy ( )

Qty. (4) Lock Washer, 5/8” Qty. (2) Carriage Bolt, 1/2-13 GR5

Qty. (4) Flat Washer, 5/8” Qty. (2) Block, 1/4” X 1.00 X 3.00

Qty. (10) Hex Nut, 1/2”-13 Qty. (1) Cable Tie (not shown)

Qty. (10) Conical Toothed Washer, 1/2” Qty. (4) Shims, 1” x 2” (not shown)

Printed in China

Summary of content (8 pages)

PAGE 1
Installation Instructions Part Numbers: GOOSENECK MOUNTING KIT Dodge Ram 2500/3500 Heavy Duty Short & Long Bed g All Megacabs 4435 Equipment Required: WARNING: Under no circumstances do we recommend exceeding the towing vehicle manufacturers recommended vehicle towing capacity.
PAGE 2
Installation Instructions GOOSENECK MOUNTING KIT Dodge Ram 2500/3500 Heavy Duty Short & Long Bed, & All Megacabs 9464/9474 HIDE-A-GOOSE INSTALLATION Part Numbers: 4435 NOTES: ¾ This rail kit can be used with a 9464 or 9474 head only. ¾ Always make sure the ball is fully locked before towing. ¾ Keep the ball and ball sleeve well lubricated. ¾ Periodically re-torque all the hitch fasteners. ¾ Check ball, hitch coupler, safety chains and other connections for proper operation every time you tow.
PAGE 3
Installation Instructions GOOSENECK MOUNTING KIT Dodge Ram 2500/3500 Heavy Duty Short & Long Bed, & All Megacabs 9464/9474 HIDE-A-GOOSE INSTALLATION Area to be notched Part Numbers: 4435 Bed Seam Vehicle Forward Passenger Side Frame Rail Figure 3 4. Line up the mounting holes in the frame brackets with the threaded studs on the ends of the cross members. Loosely attach frame brackets to rails with 5/8 hex nuts, lock washers and flat washers as shown in Figure 1. 5.
PAGE 4
Installation Instructions GOOSENECK MOUNTING KIT Dodge Ram 2500/3500 Heavy Duty Short & Long Bed, & All Megacabs 9464/9474 HIDE-A-GOOSE INSTALLATION Part Numbers: 4435 This page was intentionally left blank. z 2007, 2008, 2009, 2010 Cequent Performance Products Sheet 4 of 8 4435N 1-12-10 Rev.
PAGE 5
Installation Instructions Part Numbers: GOOSENECK MOUNTING KIT Dodge Ram 2500/3500 Heavy Duty Short & Long Bed g All Megacabs Equipment Required: Fastener Kit: 4435F Wrenches: 3/4, 15/16 4435 WARNING: Under no circumstances do we recommend exceeding the towing vehicle manufacturers recommended vehicle towing capacity.
PAGE 6
Installation Instructions Part Numbers: GOOSENECK MOUNTING KIT 4435 Dodge Ram 2500/3500 Heavy Duty Short & Long Bed, & All Megacabs 6300/8339/83391/83399 GOOSENECK HITCH INSTALLATION NOTES: ¾ This rail kit can be used with a 6300, 8339, 83391 or 83399 head only. ¾ Always make sure the ball is fully locked before towing. ¾ Keep the ball and ball pocket well lubricated. ¾ Periodically re-torque all the hitch fasteners.
PAGE 7
Installation Instructions Part Numbers: GOOSENECK MOUNTING KIT 4435 Dodge Ram 2500/3500 Heavy Duty Short & Long Bed, & All Megacabs 6300/8339/83391/83399 GOOSENECK HITCH INSTALLATION Area to be notched Bed Seam Vehicle Forward Passenger Side Frame Rail Figure 3 3. Line up the mounting holes in the frame brackets with the threaded studs on the ends of the cross members. Loosely attach frame brackets to rails with 5/8 hex nuts, lock washers and flat washers as shown in Figure 1. 4.
PAGE 8
Installation Instructions GOOSENECK MOUNTING KIT Dodge Ram 2500/3500 Heavy Duty Short & Long Bed, & All Megacabs 6300/8339/83391/83399 GOOSENECK HITCH INSTALLATION Part Numbers: 4435 Template p/n 5978 for use with 6300 head Template p/n 114234 for use with 8339 head Template p/n 114523 for use with 83399/83391 heads Durable and reusable stainless steel templates are also available. A time saver for cutting bed liner and bed.