Manual

ManualsBrandsDraw-Tite ManualsCar4437 GOOSENECK RAIL KIT

Installation Instructions

GOOSENECK MOUNTING KIT

Ford F-150

Part Numbers:

4437

Equipment Required:

Fastener Kit: 4437F

Wrenches: 13mm, 3/4, 7/8, 15/16

Drill Bits: 1/4”

Other Tools: Drill

WARNING: Under no circumstances do we recommend

exceeding the towing vehicle manufacturers recommended vehicle

towing capacity.

Vehicle Forward

5/8” Fasteners From Hitch

Fastener Kit

9465/9475 Hide-A-Goose Installation

Qty. (4) Carriage Bolt, 1/2-13 X 1.75 Gr5 Qty. (4) Flat Washer, 5/8

Qty. (4) Block, 1/4 X 1.00 x 3.00 Qty. (4) Lock Washer, 5/8

Qty. (4) Flat Washer, 1/2 Qty. (4) Hex Nut, 5/8

Qty. (4) Lock Washer, 1/2 Qty. (8) Shim, 3/16 X 1.00 X 2.00

Qty. (4) Hex Nut, 1/2

Figure 1

*Jounce Block

Frame Rail

Printed In China

*On newer model trucks jounce

block cannot be removed. Use slot

on inside of truck frame rail to pull

carriage bolts and blocks in to place.

Summary of content (6 pages)

PAGE 1
Installation Instructions Part Numbers: GOOSENECK MOUNTING KIT Ford F-150 4437 WARNING: Under no circumstances do we recommend exceeding the towing vehicle manufacturers recommended vehicle towing capacity. Equipment Required: Fastener Kit: 4437F Wrenches: 13mm, 3/4, 7/8, 15/16 9465/9475 Hide-A-Goose Installation Drill Bits: 1/4” Other Tools: Drill 5/8” Fasteners From Hitch Fastener Kit Vehicle Forward Frame Rail *Jounce Block *On newer model trucks jounce block cannot be removed.
PAGE 2
Installation Instructions Part Numbers: HIDE-A-GOOSE Ford F-150 4437 NOTES: This section of instructions refers to installing the 9465 or 9475 head only. Always make sure the ball is fully locked before towing. Keep the ball and ball sleeve well lubricated. Periodically re-torque all the hitch fasteners. Check ball, hitch coupler, safety chains and other connections for proper operation every time you tow.
PAGE 3
Installation Instructions Part Numbers: GOOSENECK MOUNTING KIT Ford F-150 4437 WARNING: Under no circumstances do we recommend exceeding the towing vehicle manufacturers recommended vehicle towing capacity. Equipment Required: Fastener Kit: 4437F Wrenches: 13mm, 3/4, 7/8, 15/16 6300/630044/8339 Gooseneck Installation Drill Bits: 1/4” Other Tools: Drill 5/8” Fasteners From Hitch Fastener Kit Vehicle Forward Frame Rail *Jounce Block *On newer model trucks jounce block cannot be removed.
PAGE 4
Installation Instructions Part Numbers: HIDE-A-GOOSE Ford F-150 4437 NOTES: This section of instructions refers to installing the 6300, 630044 or 8339 head only. Always make sure the ball is fully locked before towing. Keep the ball and ball pocket well lubricated. Periodically re-torque all the hitch fasteners. Check ball, hitch coupler, safety chains and other connections for proper operation every time you tow.
PAGE 5
Installation Instructions Part Numbers: Gooseneck Mounting Kit Ford F-150 4437 Insert forward cross member and slide forward Insert rearward cross member Figure 3 WARNING The fuel tank and/or other vehicle components are located below some of the holes. A wood or metal shield must be placed between the frame and the fuel tank to prevent puncturing the fuel tank when the drill breaks through the bed. 8.
PAGE 6
15. Installation Instructions Part Numbers: Gooseneck Mounting Kit Ford F-150 4437 Align the forward cross member with 5/8” diameter drilled holes. 9 16. Install the 5/8” X 2.50 GR5 carriage bolts through the hitch, shims and cross members. Secure with lock washers and nuts. Torque nuts to 150 Ft.-Lb. 17.