INSTALL BRACKETS Owner's manual

Installation Instructions
CUSTOM QUICK INSTALL MOUNTING KIT
Chevrolet/GMC 2500/3500
Part Number
50066
2011, 2014 Cequent Performance Products, Inc. Printed in Mexico Sheet 4 of 18 50066N 4-16-14 Rev. D
Equipment Required:
Fastener Kit: 50066F
Wrenches: 15/16
Drill Bits: 1/8” & 11/16” Drill
Other Tools: Center Punch, Measuring Tape
WARNING: Under no circumstances does Cequent Performance Products, Inc. recommend exceeding the towing vehicle
manufacturers recommended vehicle towing capacity.
2011 & up 2500 & 3500
6’6”, & 8’ Bed Pickup Installation
Figure 3
READ ALL INSTRUCTIONS BEFORE STARTING THE INSTALLATION
ITEM # DESCRIPTION QUANTITY ITEM # DESCRIPTION
QUANTITY
1 FRAME BRACKET, LH 1 4 SQUARE HOLE PLATE 4
2 FRAME BRACKET, RH 1 5 5/8" SERRATED WASHER 4
3 5/8-11 x 2" CARRIAGE BOLT 4 6 5/8-11 HEX NUT 4
7 5/8-11 PULL WIRE 4
6
Vehicle Forward
DRIVERS SIDE
FRAME RAIL
* 5/8” SERRATED
WASHER & NUT
* 5/8” x 3-1/2”
CARRIAGE BOLT
* TUBE SPACER
1-1/4” LONG
* 5/16” THICK
SPACER
Access
hole
3
2
4
5
4
PULL WIRE
ASSEMBLY
Free end of pull wire
4 BOLT INSTALLATION
WITH 30124 OR 30095
Custom Quick Install mounting brackets only include the hardware to attach the custom brackets to the frame..
*** If fasteners with the rail kit are missing, order service kit 58406.
7
3
1
HEAD MARKING
OF GRADE 8 BOLT
HEAD MARKING
OF GRADE 5 BOLT