INSTALL BRACKETS Instruction Manual

ManualsBrandsDraw-Tite ManualsCar50083 CUSTOM QUICK

NOTE!

Prior to installing product, please visit one of our websites

to assure your kit contains the most recent revision to

installation instruction and verify vehicle application.

www.ReeseProduct.com

Cover

Page

50083 CUSTOM QUICK INSTALL

MOUNTING KIT

COVER PAGE

Summary of content (7 pages)

PAGE 1
COVER PAGE 50083 CUSTOM QUICK INSTALL MOUNTING KIT NOTE! Prior to installing product, please visit one of our websites to assure your kit contains the most recent revision to installation instruction and verify vehicle application. www.ReeseProduct.
PAGE 2
Installation Instructions Part Numbers: CUSTOM QUICK INSTALL MOUNTING KIT Dodge Ram 1500 50083 (Does not fit 5-1/2’ beds) Equipment Required: WARNING: Under no circumstances do we recommend exceeding the towing vehicle manufacturers recommended vehicle towing capacity. Fastener Kit: 50083F Wrenches: ¾”, 7/8”, 15/16” Drill Bits: 1/8”, 9/16”, 5/8” Relocate Elect.
PAGE 3
FOR INSTALLATION OF 58058 OR 30035 RAIL KITS Installation Instructions Part Numbers: CUSTOM QUICK INSTALL MOUNTING KIT Dodge Ram 1500 50083 1. (Does not fit 5-1/2’ beds) Do not install mounting rails over plastic bed liners. Plastic bed liners must be cut out of the way to provide metal to metal contact. Mounting rails may be installed on spray in liners. 2. Use only bolts, nuts, and washers supplied to install this kit. All bolts & nuts are Grade 5 unless otherwise specified. 3.
PAGE 4
Installation Instructions Part Numbers: CUSTOM QUICK INSTALL MOUNTING KIT Dodge Ram 1500 50083 (Does not fit 5-1/2’ beds) Position the Rail RAILS 58058 OR 30035 ONLY USE SADDLE/SLIDER/ARCHES TO LOCATE FRONT RAIL 30-15/16” 28-15/16” 2-3/4” FOR RAILS 58058 OR 30035 ONLY © 2011, 2013, 2014 Cequent Performance Products Printed in Mexico Sheet 3 of 6 50083N 2/18/2014 Rev.
PAGE 5
11 12 6 14 3 13 8 2 5 8 1 12 9 VEHICLE FORWARD 10 7 4 FIG. 2 INSTALLATION SHOWN FOR THE 30124 OR 30095 RAILS # Name # Name # Name 1 Bracket, Front Left 1 7 .25” x 1” x 2” Blocks 4 13 5/16” x 1.5” x 5” Blocks* 2 2 Bracket, Front Right 1 8 5/8” Serrated Washers 6 14 5/8” x 1.27 Tube Spacers* 2 3 C-Channel 1 9 ½” Hex head Nuts 4 15 4 ½” Lock washers 4 10 ½” x 1.75” Carriage Bolts 4 16 5 5/8” Nut Grade 2 6 11 5/8” x 3.
PAGE 6
FOR INSTALLATION OF 30124 OR 30095 RAIL KITS Installation Instructions Part Numbers: CUSTOM QUICK INSTALL MOUNTING KIT Dodge Ram 1500 50083 (Does not fit 5-1/2’ beds) 1. Do not install mounting rails over plastic bed liners. Plastic bed liners must be cut out of the way to provide metal to metal contact. Mounting rails may be installed on spray in liners. 2. Use only bolts, nuts, and washers supplied to install this kit. All bolts are grade 5 and nuts are grade 5 unless otherwise specified. 3.
PAGE 7
Installation Instructions Part Numbers: CUSTOM QUICK INSTALL MOUNTING KIT Dodge Ram 1500 50083 (Does not fit 5-1/2’ beds) Position the Rail RAILS 30095 OR 30124 ONLY USE SADDLE/SLIDER/ARCHES TO LOCATE FRONT RAIL . 30124 . 33” 31” Bolt . . 4-7/8” FOR RAILS 30124 OR 30095 ONLY © 2011, 2013, 2014 Cequent Performance Products Printed in Mexico Sheet 6 of 6 50083N 2/18/2014 Rev.