Owner's manual

Product Code:
Product Name:
Cequent Consumer Products, Inc.
Solon, OH 44139 USA
Cequent Help Hotline: 1-800-234-6992
www.rolaproducts.com
59108 Rev A 1007
Adventure System Class II
59108
General Operating Instructions
To install Bumper Pack to Cargo Tray, lift Bumper Pack up and over tray. Rotate the Bumper Pack down
toward the lights so the two connector pins properly engage the tie-down slots in cargo tray as shown above.
Seat the Bumper Pack into the Cargo Tray.
Latch and lock the Cargo Tray/Bumper Pack latches before every use.
Note: The latch keys are taped to the inside of the lid of Bumper Pack.
Please read all instructions carefully before assembly, installation and/or use of this product.
Page 4 of 5
CONNECTOR PIN
LOCK LATCHES
BEFORE EVERY USE
Latch Closed
Latch Opened Latch Partially Closed - INCORRECT
Loading Cargo Tray or Bumper Pack
Load the heaviest items first and in the center of the Tray or Bumper Pack.
Make sure load is evenly distributed.
Secure loads before moving vehicle.
CORRECT
INCORRECT
Check all functions of lights before moving vehicle. To check functions, turn car on, turn on lights, press
on brakes, left turn signal on, and right turn signal on.