Owners manual

Installation Instructions

GOOSENECK MOUNTING KIT

Ford F-450

Will not fit Cab-on-Chassis vehicles

Part Numbers:

4449

Sheet 5 of 9 4449N 5/29/14 Rev. C

Equipment Required:

Fastener Kit: 4443F

Wrenches: 7/16”, 9/16”, 5/8”, 11/16”, 3/4”,

15/16”, 13 mm

Drill Bits: 1/4”

Other Tools: Drill

WARNING: Under no circumstances do we recommend

exceeding the towing vehicle manufacturers recommended vehicle

towing capacity.

Vehicle Forward

NOTE

• Vehicle bed cross-members

not shown for clarity.

• All holes and slots typical

on both sides of vehicle.

Figure 1

6300/8339 Gooseneck Hitch Installation

5/8” Fasteners

From Hitch Fastener Kit

Qty. (2) U-Bolt, 1/2-13 Qty. (1) Nylock Nut, 1/4

Qty. (4) Flat Washer, 1/2 Qty. (1) Hex Bolt with Washer, M8 X 1.25 X 35mm

Qty. (4) Lock Washer, 1/2 Qty. (2) Hex Nut, M8

Qty. (4) Hex Nut, 1/2 Qty. (2) Conical Washer, 3/8

Qty. (6) 5/8 Conical Toothed Washer Qty. (2) Spacer, 3/8 X 1.50 X 2.00

Qty. (1) Cable Tie (not shown) Qty. (2) Locknut, 7/16-14

Qty. (6) Hex Nut, 5/8 Qty. (2) Hex Bolt, 7/16-14 X 1.50

Qty. (2) Carriage Bolt, 5/8-11 X 2.50 GR5 Qty. (4) Shims, 1/4 X 2.00 X 1.00

Qty. (2) Block, 5/8 X 1.50 X 2.00 Qty. (4) Carriage Bolt -5 /8-11 x 2.50 GR8

Qty. (1) Hex Bolt, 1/4-20 X 1.25 Qty. (4) Flat Washer, 5/8

Qty. (2) Flat Washer, 1/4 Qty. (4) Nylon Lock Nut, 5/8