Owner manual

Chart 1
See Steps
3A and 3B
Year Vehicle Fit Center-Section Offset
88-
10
GM 1500/2500/3500
including CKSeries (6’
& 8’ Beds)
Rearward
3A
and
3B
below for
spring
adjustment
04-
10
Ford F-150 6’ & 8’
Beds
Forward
99-
10
Ford F-250/F-350/F-
450 6’ & 8’ Beds
Rearward
94-
10
Dodge
1500/2500/3500 6’ &
8’ Beds
Rearward
07-
10
Toyota Tundra 6’ & 8’
Beds
Forward
3A. To assemble the spring , use the ¼” bolts, washers, spacers and springs from the fastener kit. See Figure 10A.
Spring
Spacer
Center Section
¼” Washer
¼” Bolt
Figure 10A
3B. The coil of the spring ( See Figure 10B) is facing the rear of the truck and wide hook sits over the center section casting as
shown in Figure 10C Assemble and tighten ¼” bolts into the thread holes in the casting.
Figure 10B
Figure 10C
Center Section Casting
Wide Hook
Coil of Spring
Rear of truck
z 2010, 2011 Cequent Performance Products
Sheet 7 of 12 9480N 6-22-11 Rev. C