Owner manual

1962 OPERATORS’ MANUAL
21
TECHNICAL SPECIFICATIONS
(All measurements taken at 0dBu operating level)
INPUT IMPEDANCES
LINE 20KΩ
MIC 150Ω to 600Ω
AUX 470KΩ
MIC INPUT NOISE
-128.5dB (@ +60dB gain)
MAXIMUM INPUT LEVEL
+28dBu
OUTPUT IMPEDANCE
50Ω
MAXIMUM OUTPUT LEVEL
+22dBu (balanced)
ANALOG BANDWIDTH
15Hz to 22KHz -1dB
ANALOGUE DISTORTION (THD +n)
ref. 1KHz
Percentage
Mic and Line input at unity gain 0.01%
Line Input at 0dBu 0.025%
Mic Input at 0dBu < 0.01%
D62 specification with LINE input @ 0dBu, (all effects disabled):
CROSSTALK
- 105dB (@ +0dB gain)
THD+n @ 1Khz -2dB
(soft clip) - 70dB (@ +0dB gain)
THD+n @ 1Khz -20dB
- 93dB (@ +0dB gain)
THD+n @ 1Khz -60dB
-120dB (@ +0dB gain)
NOISE FLOOR
-123dB (@ +0dB gain)
POWER REQUIREMENTS
100-120Volt or 195-250Volt at 50-60Hz,
38 Watts
FUSE RATING
250mA for 230Volt, 500mA for 115Volt
CONFORMING TO IEC 127-2
FUSE TYPE
20mm x 5mm, Class 3 Slo-Blo, 250Volt working
CASE SIZE
482mm (w) x 88mm (h) x 250mm (d)
WEIGHT
(incl packaging) 6.5 Kgs (excluding D62-T/-A)
8 Kgs (including D62-T/-A)