Quick Start Guide

5
Interface Description
WLAN
ON/OFF
WPS
Wireless band will be switched /changed
according to the button pressed and released.
For example,
 2.4G (On) and 5G (On) – in default.
 2.4G (Off) and 5G (On) – pressed and
released the button once.
 2.4G (On) and 5G (Off) – pressed and
released the button twice.
 2.4G (Off) and 5G (Off) – pressed and
released the button three times.
WPS - When WPS function is enabled by web
user interface, press this button for more than 2
seconds. The router will wait for any wireless
client connecting to it through WPS.
Power switch.
PWR: Connecter for a power adapter.
Phone2/1
(for “V” model)
Connector of analog phone for VoIP
communication.
LAN P4-P1
Connectors for local networked devices.
 Left LED on - The port is connected.
 Left LED off - The port is disconnected.
 Left LED Blinking - The data is transmitting.
 Right LED on -The port is connected with
1000Mbps.
 Right LED off - The port is connected with
10/100 Mbps.
DSL
Connector for accessing the Internet.
USB
Connector for a USB device (for 3G/4G USB
Modem or printer).
Factory
Reset
Restore the default settings. Usage: Turn on the
router. Press the button and keep for more than
10 seconds. Then the router will restart with the
factory default configuration.