User's Manual

3
3
3
.
.
P
P
a
a
n
n
e
e
l
l
E
E
x
x
p
p
l
l
a
a
n
n
a
a
t
t
i
i
o
o
n
n
LED Status Explanation
Blinking The router is powered on and running normally. ACT
(Activity)
Off The router is powered off.
On A USB device is connected and active. USB1~USB2 /
USB
Blinking The data is transmitting.
On Wireless access point is ready.
Blinking Ethernet packets are transmitting over wireless LAN.
WLAN
Off The WLAN function is inactive.
On The WAN2 connection is ready. WAN2
Blinking It will blink while transmitting data.
On The router is ready to access Internet through DSL link. DSL
Blinking Slowly: The DSL connection is ready.
Quickly: The connection is training.
On VPN tunnel is up and down.
Off VPN services are disabled.
VPN
Blinking Traffic is passing through VPN tunnel.
QoS On The QoS function is active.
WCF On The Web Content Filter is active. (It is enabled from
Firewall >> General Setup).
On The DoS/DDoS function is active. DoS
Blinking It will blink while detecting an attack.
On A PSTN phone call comes (in and out). However, when the phone
call is disconnected, the LED will be off.
Line
Off There is no PSTN phone call.
On The phone connected to this port is off-hook.
Off The phone connected to this port is on-hook.
Phone 1/2
Blinking A phone call comes.