Quick Start Guide

4. Software Configuration

To access Internet, please finish basic configuration after completing the

hardware installation.

4.1 Quick Start Wizard for Network Connection

The Quick Start Wizard is designed for you to easily set up your router for

Internet access. You can directly access the Quick Start Wizard via Web

Configurator. Make sure your PC connects to the router correctly.

Note You may either simply set up your computer to get IP dynamically

from the router or set up the IP address of the computer to be the

same subnet as the default IP address of Vigor router 192.168.1.1.

For the detailed information, please refer to - Trouble Shooting of the

user’s guide.

Open a web browser on your PC and type http://192.168.1.1. A pop-up window

will open to ask for username and password. Please type “admin/admin” as the

Username/Password and click Login.

Note If you fail to access to the web configuration, please go to “Trouble

Shooting” on User’s Guide for detecting and solving your problem.