User's Manual

3
3
3
.
.
P
P
a
a
n
n
e
e
l
l
E
E
x
x
p
p
l
l
a
a
n
n
a
a
t
t
i
i
o
o
n
n
LED Status Explanation
ACT
(Activity)
Blinking The router is powered on and running normally.
Off The router is powered off.
USB1~USB2 On A USB device is connected and active.
Blinking The data is transmitting.
SFP On No fiber line connected.
Off File line connected.
WAN1~WAN2 On The WAN connection is ready.
Blinking It will blink while transmitting data.
QoS On The QoS function is active.
WLAN On Wireless access point is ready.
Blinking Ethernet packets are transmitting over wireless LAN.
Off The WLAN function is inactive.
CSM On The profile of CSM (Content Security Management) for
IM/P2P application is enabled from Firewall >> General
Setup. (Such profile is established under CSM menu).
VPN On VPN tunnel is up and down.
Off VPN services are disabled.
Blinking Traffic is passing through VPN tunnel.
LED on Connector
WAN1
or
Fiber WAN
Left LED
(Green)
On The port is connected.
Off The port is disconnected.
Blinking The data is transmitting through WAN1 or
Fiber WAN.
Right LED
(Green)
On The WAN1/Fiber port is connected with
1000Mbps.
Off The WAN1/Fiber port is connected with
10/100Mbps.
WAN2 Left LED
(Green)
On The port is connected.
Off The port is disconnected.
Blinking The data is transmitting.
Right LED
(Green)
On The port is connected with 1000Mbps.
Off The port is connected with 10/100Mbps.
LAN1~LAN4 Left LED
(Green)
On The port is connected.
Off The port is disconnected.