User's Manual

o Descriptions of Components
2710e 2710ne
LED Status Explanation
Off The system is not ready or is failed. ACT
Blinking The system is ready and can work normally.
On DSL connection synchronized. DSL
Blinking DSL connection is synchronizing.
On A normal connection is through its corresponding
port.
Off LAN is disconnected.
LAN 1 - 4
Blinking Data is transmitting (sending/receiving).
CSM
(for 2710e)
On The profile(s) of URL/Web Content Filter
application can be enabled from Firewall >>URL
Content Filter.
On Wireless access point is ready.
Off Wireless access point is not ready.
WLAN
(for 2710ne)
Blinking It will blink while wireless traffic goes through.
On The WPS is on.
Off The WPS is off.
WPS
(for 2710ne)
Blinking Waiting for wireless client sending requests for
connection about two minutes.
On Press this button for 2 seconds to wait for client
device making network connection through WPS.
When the LED lights up, the WPS will be on.
Off The WPS is off.
WPS Button
(for 2710ne)
Blinking Waiting for wireless client sending requests for
connection about 2 minutes.
Interface Description
DSL
Connecter for accessing the Internet through ADSL