User's Manual

Vigor2860 Series Quick Start Guide
12
Blinking The data is transmitting.
On The port is connected with 1000Mbps.Right
LED
Off The port is connected with 10/100Mbps
Interface Description
Wireless LAN
ON/OFF/WPS
Press "Wireless LAN ON/OFF/WPS" button once to
wait for client device making network connection
through WPS.
Press "Wireless LAN ON/OFF/WPS" button twice to
enable (WLAN LED on) or disable (WLAN LED off)
wireless connection.
Factory Reset Restore the default settings. Usage: Turn on the router
(ACT LED is blinking). Press the hole and keep for
more than 5 seconds. When you see the ACT LED
begins to blink rapidly than usual, release the button.
Then the router will restart with the factory default
configuration.
USB Connecter for a USB device (for 3G USB Modem or
printer).
VDSL/ADSL Connecter for accessing the Internet.
WAN2 (Giga) Connecter for local network devices or modem for
accessing Internet.
GigaLAN (1-6) Connecters for local network devices.
PWR
Connecter for a power adapter.
ON/OFF
Power Switch.