User's Manual

Vigor2860 Series Quick Start Guide
24
1
1
.
.
1
1
.
.
1
1
1
1
F
F
o
o
r
r
V
V
i
i
g
g
o
o
r
r
2
2
9
9
2
2
5
5
n
n
LED Status Explanation
Blinking The router is powered on and running
normally.
ACT (Activity)
Off The router is powered off.
On
USB device is connected and ready for use.
USB
Blinking The data is transmitting.
On
Wireless access point is ready.
WLAN
Blinking
It will blink slowly while wireless traffic goes
through.
ACT and WLAN LEDs blink quickly and
simultaneously when WPS is working, and
will return to normal condition after two
minutes. (You need to setup WPS within 2
minutes.)
On Internet connection is ready.
Off Internet connection is not ready.
WAN(1-2)
Blinking The data is transmitting.
VPN On The VPN tunnel is active.
QoS
On The QoS function is active.
WCF On The Web Content Filter is active. (It is
enabled from Firewall >> General Setup).
On The DMZ function is enabled.
Off The DMZ function is disabled.
DMZ
Blinking
The data is transmitting.
LED on Connector
On The port is connected.
Off The port is disconnected.
Left
LED
Blinking The data is transmitting.
On The port is connected with 1000Mbps.
WAN
(1-2)
Right
LED
Off The port is connected with 10/100Mbps
On The port is connected.
Off The port is disconnected.
LAN
Left
LED
Blinking The data is transmitting.