User's Manual

Vigor2860 Series Quick Start Guide
27
On The phone connected to this port is off-hook.
Off The phone connected to this port is on-hook.
Phone 1/2
Blinking A phone call comes.
LED on Connector
On The port is connected.
Off The port is disconnected.
Left
LED
Blinking The data is transmitting.
On The port is connected with 1000Mbps.
WAN
(1-2)
Right
LED
Off The port is connected with 10/100Mbps
On The port is connected.
Off The port is disconnected.
Left
LED
Blinking The data is transmitting.
On The port is connected with 1000Mbps.
LAN
(1-5)
Right
LED
Off The port is connected with 10/100Mbps
Interface Description
Wireless LAN
ON/OFF/WPS
Press "Wireless LAN ON/OFF/WPS" button once to
wait for client device making network connection
through WPS.
Press "Wireless LAN ON/OFF/WPS" button twice to
enable (WLAN LED on) or disable (WLAN LED off)
wireless connection.
Factory Reset Restore the default settings. Usage: Turn on the router
(ACT LED is blinking). Press the hole and keep for
more than 5 seconds. When you see the ACT LED
begins to blink rapidly than usual, release the button.
Then the router will restart with the factory default
configuration.
USB Connecter for a USB device (for 3G USB Modem or
printer).