User's Manual
Vigor2860 Series Quick Start Guide
32
This section will guide you to install the router through hardware connection and
configure the router’s settings through web browser.
Before starting to configure the router, you have to connect your devices
correctly. (Take Vigor2860Vn as an example)
Use one end of the DSL line cable to VDSL/ADSL port on the router to
the land line jack on the wall.
Connect one end of an Ethernet cable (RJ-45) to one of the LAN ports
of the router and the other end of the cable (RJ-45) into the Ethernet port on
your computer.
Connect the telephone set with phone lines (for using VoIP function).
For the model without phone ports, skip this step.
Connect one end of the power adapter to the router’s power port on the
rear panel, and the other side into a wall outlet.
Power on the device by pressing down the power switch on the rear
panel.
The system starts to initiate. After completing the system test, the ACT
LED will light up and start blinking.