User's Manual
Vigor2860 Series Quick Start Guide
43
To access Internet, please finish basic configuration after completing the
hardware installation.
!
!
1. Make sure your PC connects to the router correctly.
2.
Notice: You may either simply set up your computer to get IP
dynamically from the router or set up the IP address of the
computer to be the same subnet as the default IP address of
Vigor router 192.168.1.1. For the detailed information, please
refer to the later section - Trouble Shooting of the guide.
3. Open a web browser on your PC and type http://192.168.1.1. The
following window will be open to ask for username and password. Please type
“admin/admin” on Username/Password and click Login.
Notice: If you fail to access to the web configuration, please go to
“Trouble Shooting” for detecting and solving your problem.
4. Now, the Main Screen will pop up.
5. The web page can be logged out according to the chosen condition. The
default setting is Auto Logout, which means the web configuration system will
logout after five minutes without any operation. Change the setting for your