User's Manual

Vigor2860 Series Quick Start Guide
45
If your router can be under an environment with high speed NAT, the
configuration provide here can help you to deploy and use the router quickly.
The first screen of Quick Start Wizard is entering login password. After typing
the password, please click Next.
On the next page as shown below, please select the WAN interface that you use.
If DSL interface is used, please choose WAN1; if Ethernet interface is used,
please choose WAN2; if 3G USB modem is used, please choose WAN3. Then
click Next for next step.
WAN1, WAN2 and WAN3 will bring up different configuration page. Refer to
the following for detailed information.