Operation Manual

Vigor130 Series User’s Guide
104
modem’s clock. This method can only be applied when the WAN connection has been built
up.
Available settings are explained as follows:
Item Description
Set to Factory Default
Clear all profiles and recover to factory settings.
Index
Click the number below Index to access into the setting
page of schedule.
Status
Display if this schedule setting is active or inactive.
You can set up to 15 schedules. Then you can apply them to your Internet Access settings.
To add a schedule:
1. Click any index, say Index No. 1.
2. The detailed settings of the call schedule with index 1 are shown below.
Available settings are explained as follows:
Item Description
Enable Schedule
Setup
Check to enable the schedule.