Operation Manual

Vigor130 Series User’s Guide

Available settings are explained as follows:

Item Description

Check to enable the Filter

Rule

Check this box to enable the filter rule.

Comments

Enter filter set comments/description. Maximum length is

14- character long.

Index(1-15)

Set PCs on LAN to work at certain time interval only. You

may choose up to 4 schedules out of the 15 schedules

pre-defined in Applications >> Schedule setup. The

default setting of this field is blank and the function will

always work.

Clear sessions when

schedule ON

Check this box to clear the sessions when the above

schedule profiles are applied.

Direction

Set the direction of packet flow. It is for Data Filter only.

For the Call Filter, this setting is not available since Call

Filter is only applied to outgoing traffic.

Note: RT means routing domain for 2nd subnet or other

LAN.

Source/Destination IP

Click Edit to access into the following dialog to choose the

source/destination IP or IP ranges.