Installation guide

Vigor2860 Series Quick Start Guide
15
Interface
Description
Wireless LAN
ON/OFF/WPS
Press the button and release it within 2 seconds. When
the wireless function is ready, the green LED will be on.
Press the button and release it within 2 seconds to turn
off the WLAN function. When the wireless function is
not ready, the LED will be off.
When WPS function is enabled by web user interface,
press this button for more than 2 seconds to wait for
client’s device making
network connection through WPS.
Factory Reset
Restore the default settings. Usage: Turn on the router
(ACT LED is blinking). Press the hole and keep for more
than 5 seconds. When you see the ACT LED begins to
blink rapidly than usual, release the button. Then the
router will restart with the factory default configuration.
USB
Connecter for a USB device (for 3G/4G USB Modem or
printer).
VDSL/ADSL
Connecter for accessing the Internet.
WAN2 (Giga)
Connecter for local network devices or modem for
accessing Internet.
GigaLAN 1-6
Connecters for local network devices.
Phone 1/2
Connecter for analog phone(s).
Line
Connector for PSTN life line.
PWR Connecter for a power adapter.
ON/OFF Power Switch.