Installation guide

1-6
Getting Started
Only the DrayTek supplied power adapter should be connected to the
power jack.
UPLINK (back panel)
Use attached 10BaseT LAN cable to connect to another hub. The light
besides the port will be ON when the router is connected to another
hub.
LAN - P1, P2, P3, P4, P5, P6
These switch ports should be connected to your local PCs.
CONSOLE
Connects to the computer you want to use to configure Vigor2000
Router.
ISDN (Varied by Router Model)
- For S/T Interface Router Model: Connects to a NT1 box provided by
your ISDN service provider.
- For U Interface Router Model: If your ISDN service provider does not
provide the NT1 box or your ISP provides IDSL connection, use this
model for connection.