User`s guide

Vigor2110 Series User’s Guide
237
Mode
Choose the mode for WDS setting. Disable mode will not
invoke any WDS setting. Bridge mode is designed to fulfill the
first type of application. Repeater mode is for the second one.
Security
There are three types for security, Disable, WEP and
Pre-shared key. The setting you choose here will make the
following WEP or Pre-shared key field valid or not. Choose one
of the types for the router.
WEP
Check this box to use the same key set in Security Settings
page. If you did not set any key in Security Settings page, this
check box will be dimmed.
Pre-shared Key
Type – There are several types for you to choose. Default
setting is DrayTek WPA. WPA and WPA2 are used for WDS
devices (e.g., AP700). For example, if you have a
wireless AP and a Vigor2110n wireless router, you can set the
encryption mode as WPA or WPA2 to establish your WDS
system between AP and the router.
Key - Type 8 ~ 63 ASCII characters or 64 hexadecimal digits