User`s guide

Vigor2110 Series User’s Guide
38
need to click the Specify a MAC Address and enter the MAC
address in the MAC Address field.
DNS Server IP
Address
Type in the primary IP address for the router if you want to use
Static IP mode. If necessary, type in secondary IP address for
necessity in the future.
3
3
.
.
1
1
.
.
4
4
P
P
P
P
T
T
P
P
/
/
L
L
2
2
T
T
P
P
To use PPTP/L2TP as the accessing protocol of the internet, please choose PPTP/L2TP from
Internet Access menu. The following web page will be shown.
PPTP/L2TP Link Enable PPTP- Click this radio button to enable a PPTP client to
establish a tunnel to a DSL modem on the WAN interface.
Enable L2TP- Click this radio button to enable a L2TP client to
establish a tunnel to a DSL modem on the WAN interface.
Disable – Click this radio button to close the connection through
PPTP.
Server Address- Specify the IP address of the PPTP/L2TP server if
you enable PPTP/L2TP client mode.
ISP Access Setup Username -Type in the username provided by ISP in this field.
Password -Type in the password provided by ISP in this field.
WAN Backup Setup 3G USB Modem – If you install a 3G USB modem on the router,
please Enable the Dial Backup Mode to perform file backup via
USB device. After choosing Enable, please click the 3G USB
Modem Backup link to access into the following page for
configuring detailed settings.