User`s guide

Vigor2710 Series User’s Guide
213
Handset After DECT phone registered with router, it would be
assigned one unique handset ID.
Status It is used to indicate the DECT handset status. For example, if
you have registered with router DECT module, you would
get – F00_REGISTERED_IDLE. If you get one incoming
call for this DECT handset, you would see -
F07_CALL_RECEIVED.
PCM Channel This field can distinguish which PCM channel is used by
the handset. 255 (default setting) means it is idle and voice
data is not transferred through any PCM channel.
Deregister Handset If your handset has registered to the router, you could use this
button to deregister it from router.
Enable Registration Mode If you want to use handset to register with the router, you need
to enable DECT module registration mode via this button.
Otherwise, you can't search our DECT base station from the
air.
Deregister All Handset Deregister all registered handset.
E
E
x
x
a
a
m
m
p
p
l
l
e
e
:
:
Vigor 2710 VDn provides a DECT GAP/CAT-iq base module, which can facilitate 4
simultaneous wireless audio connections and 6 phone registeration.
9. Open VoIP>>DECT.
Note: DECT menu will appear if DECT module is detected.
10. In the web page, please click Enable Registration Mode and wait for DECT handset
to register.