User`s guide

Vigor2710 Series User’s Guide
32
through such direction.
For Wired LAN – If you check this box, PCs on the same network
can use another set of PPPoE session (different with the Host PC)
to access into Internet.
For Wireless LAN – If you check this box, PCs on the same
wireless network can use another set of PPPoE session (different
with the Host PC) to access into Internet.
WAN Connection
Detection
Such function allows you to verify whether network connection
is alive or not through ARP Detect or Ping Detect.
Mode – Choose ARP Detect or Ping Detect for the system to
execute for WAN detection.
Ping IP – If you choose Ping Detect as detection mode, you have
to type IP address in this field for pinging.
TTL (Time to Live) – Displays value for your reference. TTL
value is set by telnet command.
WAN Backup Setup 3G USB Modem – If you install a 3G USB modem on the router,
please Enable the Dial Backup Mode to perform file backup via
USB device. After choosing Enable, please click the 3G USB
Modem link to access into the following page for configuring
detailed settings.
PPP Client Mode - Click Enable to activate this mode for WAN2.
SIM PIN code - Type PIN code of the SIM card that will be used
to access Internet.
Modem Initial String - Such value is used to initialize USB
modem. Please use the default value. If you have any question,
please contact to your ISP.
APN Name - APN(Access Point Name) is provided by your ISP
for identifying different access points. Simply click Apply to apply
such name. Finally, you have to click OK to save the setting.
Apply – Activate the function of identification.
Modem Dial String - Such value is used to dial through USB
mode. Please use the default value. If you have any question,
please contact to your ISP.
PPP Username - Type the PPP username (optional).
PPP Password - Type the PPP password (optional).