User`s guide

Vigor2710 Series User’s Guide

Phone Settings Web Page for Vigor2710 VDn -------

Phone List Port – Phone, Phone1/Phone2 allow you to set general

settings for PSTN phones. DECT1-6 allow you to set general

settings for DECT phone.

Call Feature – A brief description for call feature will be

shown in this field for your reference.

Codec – The default Codec setting for each port will be

shown in this field for your reference. You can click the

number below the Index field to change it for each phone port.

Tone - Display the tone settings that configured in the

advanced settings page of Phone Index.

Gain - Display the volume gain settings for Mic/Speaker that

configured in the advanced settings page of Phone Index.

Default SIP Account – “draytel_1” is the default SIP account.

You can click the number below the Index field to change SIP

account for each phone port.

DTMF Relay – Display DTMF mode that configured in the

advanced settings page of Phone Index.

Disable Phone If Phone port is disabled, Phone could not be used anymore.

However, its DSP resource could be used by DECT and

DECT could dial 4 VoIP calls at the same time.