System information

Vigor3900 Series Quick Start Guide
10
Item Description
for you to assign any setting. (Host Name and Domain
Name are required for some ISPs).
PPTP - This mode lets user get the IP group information by a DSL
modem with PPTP service from ISP. Your service
provider will give you user name, password, and
authentication mode for a PPTP setting. Click PPTP as
the protocol. Type in all the information that your ISP
provides for this protocol.
If your ISP offers you PPTP (Point-to-Point Tunneling
Protocol) mode, please select PPTP for this router. Next,
enter the required information provided by your ISP on the
web page.
PPPoE - PPPoE stands for Point-to-Point Protocol over
Ethernet. It relies on two widely accepted standards: PPP
and Ethernet. It connects users through an Ethernet to the
Internet with a common broadband medium, such as a
single DSL line, wireless device or cable modem. All the
users over the Ethernet can share a common connection.
PPPoE is used for most of DSL modem users. All local
users can share one PPPoE connection for accessing the
Internet. Your service provider will provide you
information about user name, password, and
authentication mode.
If your ISP provides you the PPPoE (Point-to-Point
Protocol over Ethernet) connection, please select PPPoE
for this router to get the following page. Enter the
username and password provided by your ISP on the web
page.
When you finish the above settings, please click Next to go to next page.