User`s guide

VigorIPPBX 3510 Series User’s Guide
96
to use the Display Name as the authentication ID for such
extension profile.
Password
Type a number for the IP PBX to execute authentication.
When an IP phone connects to network, IP PBX will use
such password for authentication.
Enable PPTP VPN Dial-In for this Number /Password -
Check this box to enable remote user can use this account
setting as PPTP remote dial-in authentication account.
E-mail Address
Type an e-mail address to receive media (voice) file sent by
incoming calls.
Send a test e-mail: Click this button to send a test e-mail to
the mail box you typed here.
Voice Mail Password
Type a password here. When the user wants to listen the
voice mail, he/she must use such password to open it.
MWI (Message Waiting
Indicator)
There are two types of MWI for users to choose. Please click
the one according to the real application.
Notify User who Subscribed - The user needs to send out
SUBSCRIBE message first. When IPPBX detects new voice
message from some extension number or the condition of the
voice message is changed, it will transfer “NOTIFY”
message to the users within the valid time subscribed.
Force Notify User- The user does not send out SUBSCRIBE
message. The IPPBX will deliver “NOTIFY” message to the
users if there is a new message or the user registers on
IPPBX again.
Allow to access these
Trunks
There are several settings for SIP trunks, PSTN trunks, and
ISDN trunks for you to specify for such extension. Please
check the one(s) you want.
The available boxes listed here will be changed according to
the FXS/FXO/ISDN module inserted to VigorIPPBX 3510.
Default Trunk
Specify a PSTN/SIP/ISDN Trunk as the default trunk setting.
Such setting will be applied in Dial Plan>>DigitMap as a
selection of Trunk.
Note that only the checked trunk box(es) listed in Allow to
access these Trunks can be selected as a default trunk.