User`s guide

VigorIPPBX 3510 Series User’s Guide
107
Trunks
check the one(s) you want.
The available boxes listed here will be changed according to
the FXS/FXO/ISDN module inserted to VigorIPPBX 3510.
This is privilege settings for this trunk line. When an
incoming call connects to IPPBX via this line, it can use
other trunk line to make phone calls with the trunk line box
checked here.
MSN Numbers for the
Router
MSN Numbers mean that the router is able to accept only
number-matched incoming calls. In addition, MSN services
should be supported by local ISDN network provider. The
router provides ten fields for MSN numbers. Note that MSN
services must be acquired from your local
telecommunication operators. By default, MSN function is
disabled. If you leave the fields blank, all incoming calls will
be accepted without number matching.
Answer mode
Specify the way to process incoming phone calls which
matched the MSN number for router.
Auto Attendant - The incoming call would be picked by
router automatically. You could hear IVR voice to remind
you to dial extension number you want to reach.
Forward to Extension - The incoming call would be
forwarded to the extension number you setup directly.
Forward to Group - If you have setup group extension
number in web page "Hunt Group", the incoming
call could
be forwarded to the group extension number you selected.
Phone CLIR/CLIP
Check this box to hide or present the caller ID to remote
user.
CLIR (Calling Line Identification Restriction) hides the
caller ID.
CLIP (Calling Line Identification Presentation) presents the
caller ID.