User`s guide

VigorIPPBX 3510 Series User’s Guide
115
SIP Local Port
Set a port number as SIP local port. The default setting is
5060.
SIP Proxy Realm
Type SIP service domain name. In full SIP URI, such is the
part after @ symbol.
Parking Server Number
This number is used to communicate with the parking server
and invoke the parking function. The default setting number
is “777”.
1. When you receive a phone call and need to go to the
remote end to talk with the same caller, you have to
hold the phone call and transfer the call to this number
from VoIP phone set.
2. The parking sever will give you another voice number
(e.g., your parking number is XXXX).
Please remember it and hang up the phone set.
3. Next, use another phone set in remote end to
communicate with that caller again by dialing the
voice number (XXXX).
Call Pickup Number
Press the number specified here to pickup a call which is
ringing on another extension. For specific extension pickup,
press 'pickup number' + 'extension number' + #; for group
pickup, just press 'pickup number' + #.
For example, pickup number is *1 and 101 ~ 105 are set in
the same hunt group. When an incoming call rings extension
101; the extension 102~105 can just dial *1# to pickup the
call. However, if the extension 106 wants to pickup that call,
it needs to dial *1101#.
RTP Local Port Start/
RTP Local Port End
If your VoIP service provider gave you such information,
please type the port number for RTP traffic. Otherwise, keep
the default setting. For one port number used, type the same
port number in RTP Local Port Start and RTP Local Port
End fields. To set a range for port numbers type different
port numbers in RTP Local Port Start and RTP Local Port
End fields.
Disable registration from
WAN
Check this box to disable the extension registration from
WAN side. It can prevent unauthorized users to use your
system.
If this option is unticked, you can enable certain extensions
to register from WAN/VPN on individual extension profile
page.
Limit SIP Request WAN
Choose this item to restrict number of request per second
from WAN side.
Enable ACL (white list for
WAN IP)
Such function allows the remote client registered to this
IPPBX via WAN connection. ACL is the abbreviation of
Access Control List.
Edit ACL
This function is used to add or delete the WAN IP address
(es) of the clients who want to register extension number to
IPPBX. Click this link to open a pop-up dialog.