User`s guide

VigorIPPBX 3510 Series User’s Guide
131
Below shows the phone setting with ISDN (TE) type:
Internal Phone Extension
Active
Click Enable to invoke such profile.
Trunk Number
There are two ways to dial outside lines for an extension
number. First, dial a short number and wait for a while.
When dial tone appears, please dial the real outside line
number. Second, dial a short number and then the real
outside line number without waiting for dial tone. The short
number is defined here as Trunk Number.
ISDN Type
There are two options for ISDN setting; P-P means point to
point mode; P-MP means point to multi-point mode.
Manual Disconnection
To disconnect the ISDN trunk, simply click the Disconnect
button. The ISDN phone call will be disconnected
immediately.
ISDN-TE onnet CLIP
format
Choose the caller ID format display on extension. There are
two format as follow:
Trunk_number*Caller_ID – Add the trunk number before
caller ID.
Caller_ID only - Only show the caller ID.
PIN Code Mode
PIN code mode is used to do authentication for this trunk line
when a caller wants to make phone call via this trunk.
Check for VoIP to ISDN Calls - Click Enable to invoke
this setting. For example, a caller calls from UK via SIP
trunk to this IPPBX. Then he wants to use ISDN trunk to