User`s guide

VigorIPPBX 3510 Series User’s Guide
143
to type IP address in this field for pinging.
TTL (Time to Live) – Type a value for connection time to live.
RIP Protocol
Routing Information Protocol is abbreviated as RIP（RFC1058）
specifying how routers exchange routing tables information.
Click Enable RIP for activating this function.
Bridge Mode
If you choose Bridged IP as the protocol, you can check this
box to invoke the function. The router will work as a bridge
modem.
WAN IP Network
Settings
This group allows you to obtain an IP address automatically and
allows you type in IP address manually.
WAN IP Alias - If you have multiple public IP addresses and
would like to utilize them on the WAN interface, please use WAN
IP Alias. You can set up to 8 public IP addresses other than the
current one you are using.
Obtain an IP address automatically – Click this button to obtain
the IP address automatically if you want to use Dynamic IP mode.
Router Name: Type in the router name provided by ISP.
Domain Name: Type in the domain name that you have assigned.
Specify an IP address – Click this radio button to specify some
data if you want to use Static IP mode.
IP Address: Type the IP address.
Subnet Mask: Type the subnet mask.
Gateway IP Address: Type the gateway IP address.
Default MAC Address : Click this radio button to use default MAC
address for the router.
Specify a MAC Address: Some Cable service providers specify a
specific MAC address for access authentication. In such cases you
need to click the Specify a MAC Address and enter the MAC
address in the MAC Address field.