User`s guide

VigorIPPBX 3510 Series User’s Guide
83
7. Next, check the box of Enable ACL to activate the function of ACL. VigorIPPBX now
allows the device with the IP address listed on ACL to register extension from WAN
interface. (You can refer to the description in Note2 for ACL meaning).
8. Finally, set an extension number to be registered by remote device. Open IP
PBX>Extension and click any index number for setting the profile. In the field of
Internal Phone Extension Active, click Enable. In the field of Allow Remote
Registration From, check the box of WAN.
9. After finishing the settings, click OK.