Operating Instructions and Installation Instructions
Client Drayton File Name 7342 Drayton Amends LP20RF 06515085001 ISSB
Artworker -
Proof Stage
PRINT
Finished Size A5 148x210mm
Creative Director Mike Lane Artwork % 100%
Modification Date 19/03/15 9:21AM Bleed 3mm
User Guide Digistat+RF Room Thermostat
NOTE:
When adjusting the settings within the menu, if the
maximum or minimum possible setting are reached,
the display will ash to indicate you cannot adjust the
product further, e.g. you cannot set the Preset higher
than the maximum temperature setting.
To return to normal operation, either press the SET
button for more than 5 seconds or wait for 1 minute
and it will return automatically.
Changing the Preset Temperature
1.
To adjust the “Preset” temperature enter the
User menu by pressing and holding the Set button
for more than 5 but less than 10 seconds. Pr will
be shown.
2.
Press the set button and the display will show the
current Preset setting.
3.
Rotate the dial clockwise to increase the Preset
temperature & anti-clockwise to reduce the Preset
temperature.
4.
Press the Set button to conrm and Pr will be
displayed.
To return to normal operation, either press the Set
button for more than 5 seconds or wait for 1 minute and
it will return automatically.
Changing the Maximum Temperature Setting
1.
To adjust the “Maximum” temperature enter the
User menu by pressing and holding the Set button
for more than 5 but less than 10 seconds, then
rotate the dial clockwise until ‘HI’ is showing.
2.
Then press the Set button, the current setting is
shown.
3.
Rotate the dial clockwise to increase the maximum
temperature setting (max. 30°C) as shown.
Rotate anti-clockwise to reduce the maximum
temperature setting.
4.
Press the Set button to conrm, the display will
show HI.
11LP 20R F & DI GI STAT+R F
06515085001 ISSB