Dreambox DM 100 Bedienungsanleitung User Manual Digitaler Satellitenempfänger zum Empfang von freien und verschlüsselten DVB-Programmen. Digital satellite receiver for free and encrypted Digital Video Broadcasting (DVB).
User Manual Dreambox DM 100 english Table of contents 1. Before initial operation of the receiver 1.1 Safety instructions ...................................................................................... 4 1.2 Packaging contents .................................................................................... 7 1.3 Views ....................................................................................................... 8 1.3.1 Explanation front panel.......................................
User Manual Dreambox DM 100 english 6. Edit the channellist 6.1 Channel list ............................................................................................... 24 6.2 Edit channels ............................................................................................ 25 6.3 Edit favorites ............................................................................................. 25 6.4 Parental control ............................................................................
User Manual Dreambox DM 100 1. english Before initial operation of the receiver 1.1 Safety instructions Please read the safety instructions completely and carefully, before using the Dreambox. The Manufacturer takes no responsibility for damages as a result of incorrect handling of the Dreambox. ¾ Allow enough space around the Dreambox for sufficient ventilation, minimum 10cm. ¾ Do not cover the top of the Dreambox and allow enough space to other devices.
User Manual Dreambox DM 100 english Shut down ¾ In case your Dreambox is in use for a longer period of time disconnect the power plug from the power outlet. ¾ During thunder storm the unit should also be physically disconnected from the power outlet. Additional safety instructions ¾ (Dis-)Connecting to a LNB: Turn the Dreambox off before you connect or disconnect a cable coming from or going to a LNB. ¾ Connecting to a TV: Before connecting or disconnecting your Dreambox to/from a TV please turn it off.
User Manual Dreambox DM 100 english Disposal instructions The packaging of the Dreambox only consists of reusable materials. Please recycle if possible. This symbol on the product or on its packaging indicates that this product must not be disposed of with your other household waste. Instead, it is your responsibility to dispose of your waste equipment by handing it over to a designated collection point for the recycling of waste electrical and electronic equipment.
User Manual Dreambox DM 100 1.2 english Packaging contents Please check the completeness of the box’s contents. Included in box: 2 Batteries (1,5V Mignon / AA / LR6) Dreambox DM 100 Remote control Power supply CWT 12V, 2A, 24W 1 Power cord 1 User manual (most recent version online: http://www.dream-multimedia-tv.
User Manual Dreambox DM 100 1.
User Manual Dreambox DM 100 english 1.3.1 Explanation Front Panel Smartcard Reader Insert your Dreamcrypt Smartcard with the golden chip facing down and forward into the Smartcard reader. Dreamcrypt is a registered trademark of Dream-Multimedia. Standby LED The Standby LED lights up red if the Dreambox is in standby mode. It lights up green if the Dreambox is powered on. Remote Control (RC) Led The remote control LED lights up every time the Dreambox receives a signal from the remote control.
User Manual Dreambox DM 100 english Power supply connector Plug the power cable of the power supply that came with your Dreambox into power outlet. Connect your power supply to your Dreambox. You must not connect the power plug of the power supply to anything other than a socket that supplies 230V/50Hz. Network interface (Ethernet 10/100Mbit, RJ45) The Communication Port is an Ethernet port. It is used to communicate with your Dreambox via HTTP, FTP, NFS, Telnet and Samba.
User Manual Dreambox DM 100 1.
User Manual Dreambox DM 100 english Important notes about operation All functions of the Dreambox can be controlled via OSD-Menu (On-Screen-Display). This makes the handling of the Dreambox very easy for you. All options are indicated by four colored dots or beams (red, green, yellow, blue) in the OSD-Menu and can be started with the Option-Buttons on the Remote Control. Depending on the chosen Menu, these options do vary. All Menus and Service lists are closed with the EXITButton.
User Manual Dreambox DM 100 english Explanation remote control buttons MENU-Button - INFORMATION - INSTALLATION - SYSTEM SETTINGS - EDIT - GAMES - CARDS You can switch to the needed option by pressing the Navigation-Buttons left or right. Also see: Important notes about operation. If you are in the service list, pressing the MENU-Button brings up the service menu. The shown options may vary depending on the service list you selected. Standby-Button The Standby-Button switches your Dreambox on and off.
User Manual Dreambox DM 100 english INFO-Button If no OSD menu is visible on the screen and you are in TV or RADIO-Mode, pressing the INFO-Button will reveal the Infobar. Pressing it again while the Infobar still is visible will bring up the EPG information of the chosen station as long as it available. OK-Button By pressing the OK-Button you confirm a selection in the menu or service list navigation. If no OSD menu is present on your screen, the service list is shown once you press the OKButton.
User Manual Dreambox DM 100 english TEXT-Button The TEXT-Button activates the Teletext (TuxTxt). If you are in the stations list, pressing this button will directly take you to the FILE-Mode. TV/RADIO-Button Pressing the TV/RADIO-Button activates the TV-Mode or RADIO Mode PIP-Button Pressing the PIP-Button activates Picture in Picture model.
User Manual Dreambox DM 100 2. Installation 2.1 Turning the device on english ¾ Place the batteries inside the battery compartment of the remote control keeping in mind the right polarity. ¾ Before using the Dreambox, please read the safety instructions (See chapter 1.1 Safety instructions) ¾ Connect the LNB or antenna with a coaxial cable to LNB in or Antenna in at your Dreambox. See chapter 1.3.2 Explanation rear panel.
User Manual Dreambox DM 100 3. Start wizard 3.1 Language selection english When you turn on Dreambox for the first time, or run ‘factory reset’ you have to choose OSD language first. Select your desired and language with the Navigation-Buttons up and down. Press the OK-Button to activate. Pressing the OK-Button will enter next menu.
User Manual Dreambox DM 100 4. Basic operation 4.1 Turning your Dreambox on and off english Use the Standby-Button to turn your Dreambox on and off. To put your Dreambox into Standby-Mode either press the Standby-Button on your remote control or on your Dreambox. Holding down the Standby-Button on your remote control for three seconds will show the Shutdown / Standby menu. 4.
User Manual Dreambox DM 100 4.4 english Audio tracks Press Audio-Button in TV or Radio mode will reveal the audio menu of the service. Use the Navigation-Buttons up and down to move to desired audio track. Press the OK-Button to select. The contents of this menu will vary from service to service. Move to the option “Stereo”. Use the NavigationButtons left or right to choose the different audio modes, Left-Mono, Stereo, Right-Mono. Press the OK-Button to select. . 4.
User Manual Dreambox DM 100 4.7 english Multi-picture The Multi-picture menu appears by pressing the green Options-Button. You can select to see 4 or 9 pictures in one. Press the OK-Button to select. You can move up, down, left, right by using Navigation-buttons. You can press OK-Button to see switch to the selected channel. 4.8 Satellite list The Satellite List menu appears by pressing the yellow Options-Button. You can see all satellite that were scanned.
User Manual Dreambox DM 100 4.9 english History list The History List menu appears by pressing the blue Options-Button. You can see all channels you watched so far. The first channel in the list is the most recent one. Select a channel and press OK-Button. 4.10 Radio channel The Radio channel appears by pressing the blue TV/Radio-Button. You can select TV or Radio mode by pressing the TV/Radio-Button.
User Manual Dreambox DM 100 4.11 english Infobar The Infobar appears by pressing the OK-Button once, if no OSD menu is shown on your screen. The Infobar shows all necessary Information about the selected service.
User Manual Dreambox DM 100 5. english Electronic Program Guide – EPG The EPG menu appears by pressing the EPG-Button. If no OSD menu is visible on your screen and you are in TV mode press the TV-Button to access the service list. Press the Info-Button to get to the extended EPG. Select „Channel EPG“ and press the OK-Button to activate it. Use the Navigation-Buttons to navigate to the desired event and press the OK-Button to view selected channel. Pressing the EXIT-Button will quit the EPG.
User Manual Dreambox DM 100 6. Edit the channellist 6.1 Channel list english When you press OK-Button in TV or Radio mode, you can see channel list menu. Press the red Options-Button to sort channels alphabetically. Press the green Options-Button to sort channels by input alphabet. Press the yellow Options-Button to sort FTA/Scramble/All channels. Press the OK-Button to switch to the selected channel. Press the Info-Button to view specific information.
User Manual Dreambox DM 100 6.2 english Edit channels If no OSD menu is visible on your screen, press the Menu-Button to open the main OSD menu. Navigate to the option “Edit Channels” and press the OK-Button to select. Press the red Options-Button to lock or unlock the selected channel. Press the green Options-Button to delete the selected channel. Press the yellow Options-Button to move the selected channel. Press the blue Options-Button to rename the selected channel.
User Manual Dreambox DM 100 6.4 english Parental control If no OSD menu is visible on your screen, press the Menu-Button to open the main OSD menu. Navigate to the option “Parental Lock” and press the OK-Button to select. It prevents anyone else from having unauthorized access to certain services, videos and audios. It also offers the possibility to only make certain services available to your kids. These protection mechanisms are controlled by a four digit PIN that only is know to you.
User Manual Dreambox DM 100 7. Setup 7.1 Language english If no OSD menu is visible on your screen, press the Menu-Button to open the main OSD menu. Navigate to the option “Language Settings” and press the OK-Button to select. OSD Language: select your desired OSD language. Audio Language: select you desired standard audio language. Subtitle Language: select your desired standard subtitle language. 7.2 Setting the time zone The time can be set automatically by switching the mode to Auto.
User Manual Dreambox DM 100 7.3 english OSD settings If no OSD menu is visible on your screen, press the Menu-Button to open the main OSD menu. Navigate to the option “OSD Settings” and press the OK-Button to select. OSD Transparency : change transparency between 50 ~ 100% Banner Timeout : set infobar timeout between 1 ~ 5sec. 7.4 Factory reset If no OSD menu is visible on your screen, press the Menu-Button to open the main OSD menu.
User Manual Dreambox DM 100 8. Service searching 8.1 Select the satellite english You can select which satellites you want to scan in this menu. Use the Navigations-Buttons up/down to navigate and press the OK-Button to select or unselect the highlighted satellite. Pressing the yellow Options-Button enables you to rename the sattelite. Pressing the green Options-Button takes you to the next menu. Pressing the EXIT-Button takes you to the previous menu. 8.
User Manual Dreambox DM 100 english 8.3.1 Automatic transponder scan Set the Mode option to Auto by using the Navigation-Buttons left/right to scan a preset list of transponders. Mode : Select Auto mode. Network Scan : Choose from on and off. Scan Type : Choose from All TV/Radio, All TV, All Radio, Free TV, Free Radio. LNB Frequency : Show the LNB Frequency which was set up in the Antenna Setup menu. Select the Scart Scan option and press the OKButton to start the automatic scan. 8.3.
User Manual Dreambox DM 100 english 8.3.3 PID transponder scan Set the Mode option to PID by using the Navigation-Buttons left/right to scan a desired PIDs on a single transponder. Mode : Select PIDmode. TP Frequency : Set you desired transponder frequency. Symbol Rate : Set your desired symbol rate. Polarity : Choose from Horizontal and Vertical. PID: Enter your desired PID value. Scan Type : Choose from All TV/Radio, All TV, All Radio, Free TV, Free Radio.
User Manual Dreambox DM 100 8.4 english Channel scan Once you have started the scan you will be taken to the Channel Scan menu. Wait until channel scan reaches 100%. Press OK-Button to save all found channels. 8.5 Motor Setup Use this type of configuration if you want to receive many satellites with a Rotor or Stab from a Single Universal LNB. These options are enabled if you select anything other than disabled for the motor option in the Antenna setup menu (See chapter 8.2). 8.5.1 DiSEqC 1.
User Manual Dreambox DM 100 english 8.5.2 USALS Use the Navigation-Buttons up/down and left/right to set the motor option to USALS. Press the OK-Button. My Longitude/Latitude: Enter the latitude and longitude of your position. Goto: Press the OK-Button and the motor will turn your dish to the selected satellite. Move : Pressing the Navigation-Buttons left/right will move the motor. You can fine tune the motor. Store : Press the OK-Button to save the position of the motor.
User Manual Dreambox DM 100 9.
User Manual Dreambox DM 100 Output digital: Output Level 0,5 Vss on 75 Ohm Sampled Data Filtering 32 kHz, 44.1 kHz, 48 kHz, 96 kHz S/PDIF-Output optical (AC3) Video parameter: Input Level FBAS 1 Vss +/- 0.3 dB on 75 Ohm Teletext filter in conformity with ETS 300 472 Standard TV-SCART: Output: RGB,CVBS USB: USB-B connector Ethernet: 10/100 Mbit compatible interface LNB Power and polarization: LNB Current 500mA max.
User Manual Dreambox DM 100 10. Contact & support information Headquarter & Distribution: Dream-Multimedia GmbH Pierbusch 24-26 44536 Lünen Germany Dealer’s Hotline: (Dealers only) Tel.: +49 (0)180 - 3 85 85 90 112 (0,09€/min.) Fax: +49 (0)180 - 3 85 85 90 777 (0,09€/min.) You can reach the dealer’s hotline from : Mo - Fr. 09:00 am - 03:00 pm Technical Hotline: Tel.: +49 (0)180 - 3 85 85 90 110 (0,09€/min.) Fax: +49 (0)180 - 3 85 85 90 111 (0,09€/min.) You can reach the technical hotline from: Mo - Fr.